Sdh

[ZR_Seanie]

Hello
I am playing with a 2610 router while i do my studies as i have 3 spare at work
my questions are

Can I use SDH with a 2610 (what is min version of IOS that supports this as my flash does not hold much data).

The 2610 only has one ethernet port can the AUX port be configured as a ethernet port or just as DMZ.

Is there a WIC card that can be used to connect the router to ADSL and do i need a min IOS for it to see it or does the 2610 auto detect the wic cards.
I am chapter 3 and want to prep for chapter 4

Thanks in advance

[crissa]

Hello
I am playing with a 2610 router while i do my studies as i have 3 spare at work
my questions are

Can I use SDH with a 2610 (what is min version of IOS that supports this as my flash does not hold much data).

The 2610 only has one ethernet port can the AUX port be configured as a ethernet port or just as DMZ.

Is there a WIC card that can be used to connect the router to ADSL and do i need a min IOS for it to see it or does the 2610 auto detect the wic cards.
I am chapter 3 and want to prep for chapter 4

Thanks in advance

Hello,
using the aux port in a lab is a nice idea! I found <http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a0080093c7b .shtml (http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a0080093c7b .shtml)> and gave it a try and ... it works!

r2516a#sh ip int brief | inc Async
Async1 192.168.10.1 YES manual up up

r2516a# sh cdp nei
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater

Device ID Local Intrfce Holdtme Capability Platform Port ID
r2516b Async1 171 R 2516 Async1
HTH!
Bye, Tore