14. Reconfigure the router with the following IP addresses on the 2811 B router (try to configure this without looking at the answers for the NAT/PAT configuration we just finished):
Interface f0/0: 192.168.76.94/27
Interface s0/0: 192.0.2.165/30
Inside global: 198.18.149.113-118/29
Inside local: 102.168.76.65-94/27

Isn't it wrong the Inside Local range considering the f0/0 address?
Shouldn't it be 192.168.76.65-94/27 the correct information?

I've been enjoying reading this book but I must confess that chapter 11 is the worst with a lot of mistakes.

I'll have to read another book to understand the concepts.