EIGRP Redistribution Problem

[milanchatterjee]

Hi All
I had been practicing the redistribution between EIGRP and RIP for the last few days on PT5.2 simulator. I did not do any fancy configuration, but just followed the exact copy of Todd’s configuration in his book. Initially, I had not faced any problem, but lately I am facing some problems, for which I could not find the point where I screwed up.

I am giving the sh run results for the three routers, where I am facing the problem. The routers are arranged as follows. EIGRP RIP EIGRP

Thanks and Regards

Milan chatterjee

EIGRP running first router

A#sh run
Building configuration...

Current configuration : 1090 bytes
!
version 12.4
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname A!
enable secret 5 $1$mERr$YILA7SpAc9miYsbn3.r9H1
!
ip name-server 0.0.0.0
!
interface FastEthernet0/0
no ip address
duplex auto
speed auto
shutdown
!
interface FastEthernet0/1
no ip address
duplex auto
speed auto
shutdown
!
interface Serial0/0/0
no ip address
shutdown
!
interface Serial0/1/0
ip address 10.1.10.1 255.255.255.0
clock rate 250000
!
interface Vlan1
no ip address
shutdown
!
router eigrp 100
redistribute rip metric 10000000 20000 255 1 1500
network 10.0.0.0
auto-summary
!
router rip
redistribute eigrp 100 metric 1
!
ip classless

*
*

End

RIPv2 running router

interface Serial0/0/0
ip address 10.1.10.2 255.255.255.0
!
interface Serial0/1/0
ip address 10.1.11.1 255.255.255.0
clock rate 250000
!
interface Serial0/1/1
no ip address
shutdown
!
interface Serial0/3/0
no ip address
shutdown
!
interface Serial0/3/1
no ip address
shutdown
!
interface Vlan1
no ip address
shutdown
!
router rip
version 2
network 10.0.0.0
!
ip classless
!
line con 0
password chatte

EIGRP running 2nd router

!
router eigrp 100
redistribute rip metric 10000000 20000 255 1 1500
network 10.0.0.0
auto-summary
!
router rip
redistribute eigrp 100 metric 1
!
ip classless
!
!