Static route still showing up after no auto-summary.

[l0fi]

Hey guys, im on pages 442-443 on the 7th edition, and after i've gone through all of the routers and typed the commands:

router eigrp 10
no auto-summary

the static route to 176.16.10.0 is still showing up in my routing table. I tried to do the "clear ip route *" command and let it sit for a while, but nothing is changing, my routing table still looks like this :

10.0.0.0/24 is subnetted, 5 subnets
C       10.1.1.0 is directly connected, Vlan1
C       10.1.2.0 is directly connected, Serial0/0/0
C       10.1.3.0 is directly connected, Serial0/1/0
C       10.1.4.0 is directly connected, Serial0/2/0
C       10.1.5.0 is directly connected, FastEthernet0/0
     176.16.0.0/24 is subnetted, 1 subnets
S       176.16.10.0 [150/0] via 10.1.5.2
D    192.168.10.0/24 [90/20514560] via 10.1.2.2, 00:00:07, Serial0/0/0
D    192.168.20.0/24 [90/20514560] via 10.1.2.2, 00:00:07, Serial0/0/0
D    192.168.30.0/24 [90/20514560] via 10.1.4.2, 00:00:07, Serial0/2/0
O    192.168.40.0/24 [110/65] via 10.1.4.2, 00:00:07, Serial0/2/0

Also as you may have noticed i have the OSPF route in the table since this is my second time through the chapter and im using the same network. This leads me to my second question. I have gone through on the corp router and on router 2 where the 192.168.40.0 network is and entered the command

no router ospf 1

but the OSPF route is still showing up as well. I feel like either im missing something here or maybe its just an issue with packet tracer.

Thanks for the help, Cheers

edit : Hmm it appears i didnt search well enough i found one of my questions answered on another thread, i guess ill manually remove the static route. But as for the OSPF route, im still stumped.

edit2: ok so it seems after shutting down the loopback and removing the ospf route manually then reloading it solved the issue.