ENARSI BGP – Topic-Based Mini Quiz 1
Quiz Summary
0 of 6 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading…
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 6 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
- 1
- 2
- 3
- 4
- 5
- 6
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 6
1. Question
Examine the BGP configuration shown. Which statement regarding this configuration is true?
R1:
ip prefix-list MYLIST seq 5 permit 10.10.10.0/24
!
route-map MYMAP permit 10
match ip address prefix-list MYLIST
set as-path prepend 65000CorrectIncorrect -
Question 2 of 6
2. Question
Examine the BGP configuration shown. Which statement regarding this configuration is true?
R1:
ip prefix-list MYLIST seq 5 permit 10.10.10.0/24
!
route-map MYMAP permit 10
match ip address prefix-list MYLIST
set as-path prepend 65000CorrectIncorrect -
Question 3 of 6
3. Question
You have noticed that a prefix for your BGP topology is not being advertised to peers. This prefix is in the BGP table, but you note that it is not marked as a best path. What is the most likely issue?
CorrectIncorrect -
Question 4 of 6
4. Question
You have run the show ip bgp summary command and you have discovered the following output:
10.0.0.1 4 200 965 948 0 0 0 00:02:24 Idle (PfxCt)
What is the most likely reason for this idle state?
CorrectIncorrect -
Question 5 of 6
5. Question
You have decided to use weight in order to influence outbound traffic flows with BGP. What should be your approach?
CorrectIncorrect -
Question 6 of 6
6. Question
You are interested in configuring the peerings between your eBGP speakers using the loopback addresses of the devices. What two commands should you use?
CorrectIncorrect