Skip to content

Courses
Advanced Solutions
Books
Blog
Contact

ENARSI Redistribution – Topic-Based Mini Quiz 1

CCNP ENARSI 300-410 Practice Pack Topic-Based Mini Quizzes ENARSI Redistribution – Topic-Based Mini Quiz 1

Time limit: 0

Quiz Summary

0 of 9 Questions completed

Questions:

Information

You have already completed the quiz before. Hence you can not start it again.

Quiz is loading…

You must sign in or sign up to start the quiz.

You must first complete the following:

Results

Quiz complete. Results are being recorded.

Results

0 of 9 Questions answered correctly

Your time:

Time has elapsed

You have reached 0 of 0 point(s), (0)

Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)

Categories

Not categorized 0%

1
2
3
4
5
6
7
8
9

Current
Review
Answered
Correct
Incorrect

Question 1 of 9

1. Question
A router is running three routing processes: RIP, OSPF, and EIGRP, each configured with default characteristics. Each process learns a route to the same remote network. If there are no static routes to the destination and none of the routes were redistributed, which route will be placed in the IP routing table?
- The route learned through EIGRP.
- The route learned through OSPF.
- The route learned through RIP.
- The route with the lowest metric.
- All three routes with the router load balancing.
Correct

Incorrect
Question 2 of 9

2. Question
Refer to Exhibit. Which statement about redistribution from BGP into OSPF process 10 is true?
- Network 172.16.1.0/24 is not redistributed into OSPF.
- Network 10.10 10.0/24 is not redistributed into OSPF
- Network 172.16.1.0/24 is redistributed with administrative distance of 1.
- Network 10.10.10.0/24 is redistributed with administrative distance of 20.
Correct

Incorrect
Question 3 of 9

3. Question
Refer to the exhibit. A network administrator configured mutual redistribution on R1 and R2 routers, which caused instability in the network. Which action resolves the issue?
- Set a tag in the route map when redistributing EIGRP into OSPF on R1. and match the same tag on R2 to allow when redistributing OSPF into EIGRP.
- Apply a prefix list of EIGRP network routes in OSPF domain on R1 to propagate back into the EIGRP routing domain.
- Set a tag in the route map when redistributing EIGRP into OSPF on R1, and match the same tag on R2 to deny when redistributing OSPF into EIGRP.
- Advertise summary routes of EIGRP to OSPF and deny specific EIGRP routes when redistributing into OSPF.
Correct

Incorrect
Question 4 of 9

4. Question
Refer to the exhibit. An engineer is trying to redistribute OSPF to BGP, but not all of the routes are redistributed. What is the reason for this issue?
- By default, only internal OSPF routes are redistributed into BGP.
- By default, only internal routers and external type 1 routes are redistributed into BGP.
- BGP convergence is slow, so the route will eventually be present in the BGP table.
- Only classful networks are redistributed from OSPF to BGP.
Correct

Incorrect
Question 5 of 9

5. Question
Refer to the exhibit. Redistribution is enabled between the routing protocols, and now PC2 PC3, and PC4 cannot reach PC1. What are the two solutions to fix the problem? (Choose two).
- Filter RIP routes back into RIP when redistributing into RIP in R2.
- Filter OSPF routes into RIP FROM EIGRP when redistributing into RIP in R2.
- Filter all routes except RIP routes when redistributing into EIGRP in R2.
- Filter RIP AND OSPF routes back into OSPF from EIGRP when redistributing into OSPF in R2
- Filter all routes except EIGRP routes when redistributing into OSPF in R3.
Correct

Incorrect
Question 6 of 9

6. Question
Refer to the exhibit. Which subnet is redistributed from EIGRP to OSPF routing protocols?
- 10.2.2.0/24
- 10.1.4.0/24
- 10.1.2.0/24
- 10.2.3.0/26
Correct

Incorrect
Question 7 of 9

7. Question
Refer to the exhibit. Which routes from OSPF process 5 are redistributed into EIGRP?
- E1 and E2 subnets matching access list TO-OSPF.
- E1 and E2 subnets matching prefix list TO-OSPF.
- Only E2 subnets matching access list TO-OSPF.
- Only E1 subnets matching prefix listTO-OS1.
Correct

Incorrect
Question 8 of 9

8. Question
Which two statements about redistributing EIGRP into OSPF are true? (Choose two).
- The redistributed EIGRP routes appear as type 3 LSAs in the OSPF database.
- The redistributed EIGRP routes appear as type 5 LSAs in the OSPF database.
- The administrative distance of the redistributed routes is 170.
- The redistributed EIGRP routes appear as OSPF external type 1.
- The redistributed EIGRP routes as placed into an OSPF area whose area ID matches the EIGRP autonomous system number.
- The redistributed EIGRP routes appear as OSPF external type 2 routes in the routing table.
Correct

Incorrect
Question 9 of 9

9. Question
You need to resolve a route-selection problem in a redistributed network by increasing the administrative distance to several networks for a protocol, other than EIGRP or BGP, so that these routes will not be used. You create access list 5 to identify the relevant networks, and access the routing protocol configuration prompt. Which command will set the administrative distance to these networks to 220 for the selected protocol?
- Router(config-router)# list 5 distance 220
- Router(config-router)# admin 220 access-list 5
- Router(config-router)# distance 220 0.0.0.0 255.255.255.255 5
- Router(config-router)# increase 0.0.0.0 255.255.255.255 admin 220 list 5
Correct

Incorrect

Terms and Conditions
Privacy Policy
Contact

© 2024 Todd Lammle, LLC
All Rights Reserved.

Username or Email Address

Password

Remember Me

Lost your password?

Don't have an account yet? Sign up

Courses
Advanced Solutions
Books
Blog
Contact