BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Todd Lammle, LLC - ECPv4.9.3.1//NONSGML v1.0//EN CALSCALE:GREGORIAN METHOD:PUBLISH X-WR-CALNAME:Todd Lammle, LLC X-ORIGINAL-URL:https://www.lammle.com X-WR-CALDESC:Events for Todd Lammle, LLC BEGIN:VEVENT DTSTART;VALUE=DATE:20190617 DTEND;VALUE=DATE:20190622 DTSTAMP:20190616T232010 CREATED:20181230T225453Z LAST-MODIFIED:20190210T222749Z UID:47187-1560729600-1561161599@www.lammle.com SUMMARY:Cisco ASA Essentials Security Training 6/17/19 DESCRIPTION:ASA Essentials (ASAE) v3.0 is a 5-day Cisco ASA training course where the student will gain the essential skills required to configure\, maintain\, and operate Cisco ASA 5500-X Series Adaptive Security Appliances based on ASA Software v9.x. If you need to get up to speed quickly with Cisco’s Adaptive Security Appliance (ASA)\, this is the Cisco ASA online course for you. \nWe have combined the most important content from Cisco’s Authorized CCNP Security courses and added additional information on the new features in v9.x software to hone in on the most crucial aspects of the ASA. In just one week\, students will cover: Cisco ASA Firewall Training Basics\, Network Address Translation (NAT)\, Access Control Lists (ACLs)\, Object Groups\, Stateful Inspection\, Modular Policy Framework\, PKI Integration\, Site-to-site and Remote Access VPN (both IPsec and SSL)\, Active/Standby Failover\, Server-based Authentication\, Authorization\, and Accounting (AAA) using ACS 5.2. \nIf you need to know how to implement and manage Cisco ASA 5500-X\, get the essential skills that you need for the job by signing up for our comprehensive\, instructor-led course. \n\n\n\nPrerequisites \nIt is recommended that prior to taking this course\, the learner should have successfully completed the following: \n\nIINS 2.0 – Implementing Cisco IOS Network Security\n\nCourse Objectives \nUpon successful completion of this course\, the learner will be able to do meet these overall objectives: \n\nTechnology and features of the Cisco ASA\nCisco ASA product family\nHow ASAs protect network devices from attacks\nBootstrap the security appliance\nPrepare the security appliance for configuration via the Cisco Adaptive Security Device Manager (ASDM)\nLaunch and navigate ASDM\nEssential security appliance configuration using ASDM and the command-line interface (CLI)\nConfigure dynamic and static address translations\nConfigure access policy based on ACLs\nUse object groups to simplify ACL complexity and maintenance\nUse the Modular Policy Framework to provide unique policies to specific data flows\nHandle advanced protocols with application inspection\nTroubleshoot with syslog and tcp ping\nConfigure the ASA to work with Cisco Secure ACS 5.2 for RADIUS-based AAA of VPNs\nImplement site-to-site IPsec VPN\nImplement remote access IPsec and SSL VPNs using the Cisco AnyConnect 3.0 Secure Mobility Client\nWork with the 5.x Legacy Cisco IPsec VPN client and Anyconnect VPN client\nDeploy clientless SSL VPN access\, including smart tunnels\, plug-ins\, and web-type ACLs\nConfigure access control policies to implement your security policy across all classes of VPN\nConfigure Active/Standby failover for both firewall and VPN high availability\n\n\n\n\n\nModule 1: Cisco ASA Essentials \n\nLesson 1: Evaluating Cisco ASA Technologies\nLesson 2: Identifying Cisco ASA Families\n\nModule 2: Basic Connectivity and Device Management \n\nLesson 1: Preparing the Cisco ASA for Network Integration\nLesson 2: Managing Basic Cisco ASA Network Settings\nLesson 3: Configuring Cisco ASA Device Management Features\n\nModule 3: Network Integration \n\nLesson 1: Configuring Cisco ASA NAT Features\nLesson 2: Configuring Cisco ASA Basic Access Control Features\n\nModule 4: Cisco ASA Policy Control \n\nLesson 1: Cisco ASA Modular Policy Framework\nLesson 2: Configuring Cisco ASA Connection Policy\n\nModule 5: Cisco ASA VPN Architecture and Common Components \n\nLesson 1: Implementing Profiles\, Group Policies\, and User Policies\nLesson 2: Implementing PKI Services\n\nModule 6: Cisco ASA Clientless Remote Access SSL VPN Solutions \n\nLesson 1: Deploying Basic Clientless VPN Solutions\nLesson 2: Deploying Advanced Application Access for Clientless SSL VPNs\n\nModule 7: Cisco AnyConnect Remote Access SSL Solutions \n\nLesson 1: Deploying a Basic Cisco AnyConnect Full-Tunnel SSL VPN Solution\n\nModule 8: Cisco ASA Remote Access IPsec VPNs \n\nLesson 1: Deploying Cisco Remote Access VPN Clients\nLesson 2: Deploying Basic Cisco Remote Access IPsec VPN Solutions\n\nModule 9: Cisco ASA Site-to-Site IPsec VPN Solutions \n\nLesson 1: Deploying Basic Site-to-Site IPsec VPNs\nLesson 2: Deploying Advanced Site-to-Site IPsec VPNs\n\nModule 10: Cisco ASA High Availability and Virtualization \n\nLesson 1: Configuring Cisco ASA Active/Standby High Availability\n\nLab Outline \n\nLab 1: Prepare the ASA for Administration\nLab 2: Fundamental ASA Configuration\nLab 3: Network Address Translation (NAT)\nLab 4: Basic Access Control\nLab 5: Basic Protocol Inspection\nLab 6: Licensing\, ACS\, and Public CA\nLab 7: Basic Clientless SSL VPN\nLab 8: Clientless SSL VPN – Thin Apps\nLab 9: Basic AnyConnect Full Tunnel SSL VPN\nLab 10: Remote Access IPSec VPN\nLab 11: IPSec Site-to-Site VPN\nLab 12: Active/Standby Failover\n\n\n\n\n \n URL:https://www.lammle.com/event/cisco-asa-security-training-6-17/ LOCATION:Live Online CATEGORIES:Cisco Security Training,CCIE Security,CCNA/CCNP/CCIE,CCNA Security (IINS) END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190617 DTEND;VALUE=DATE:20190622 DTSTAMP:20190616T232010 CREATED:20181230T231530Z LAST-MODIFIED:20181230T231706Z UID:47217-1560729600-1561161599@www.lammle.com SUMMARY:Implementing Core Cisco ASA Security (SASAC) v1.0 6/17 DESCRIPTION:Cisco ASA Core Security Training\nImplementing Core Cisco ASA Security (SASAC) v1.0 is a new 5-day ILT class that: \n\nCovers the Cisco ASA 9.x core firewall and VPN features\nOffers hands-on labs Cisco ASA Core v1.0 is designed to teach network security engineers working on the Cisco ASA Adaptive Security Appliance to implement core Cisco ASA features\, including the new ASA 9.0 and 9.1 features.\n\n  \n\n\n \n URL:https://www.lammle.com/event/implementing-core-cisco-asa-security-sasac-v1-5-20-copy/ LOCATION:Live Online CATEGORIES:Cisco Security Training,CCIE Security,CCNP Security,CCNA/CCNP/CCIE,CCNA Security (IINS) END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190617 DTEND;VALUE=DATE:20190622 DTSTAMP:20190616T232010 CREATED:20190420T194200Z LAST-MODIFIED:20190510T190648Z UID:49046-1560729600-1561161599@www.lammle.com SUMMARY:SOLD OUT! Firepower/FTD Intense Hands-on Class with 6.4 code! 6/17 week Las Vegas or Live Online! DESCRIPTION:Featured class!\nClass runs 9-4pm\, 9-noon Friday PST \n \nOver 70-hands-on labs to help you really understand the material and how Firepower works! \n6-days of pod time included! \nYou will learn how to administrate a Cisco Firepower and FTD environment! \nFirepower Class TOC June 2019 \n  \nIf attending in-person\, the class will be held here: \nhttps://bit.ly/2XdKpyO \n  \nSingle student: $3995 \nTwo students: $3695 each \nThree students: $3295 each \nFour students: $2795 each \nFive or more\, contact for private onsite! \n\n\n \n URL:https://www.lammle.com/event/6-17-vegas/ LOCATION:Las Vegas\, 370 Hughes Center Dr\, Las Vegas\, NV\, 89169\, United States CATEGORIES:Cisco Security Training,Firepower END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190624 DTEND;VALUE=DATE:20190629 DTSTAMP:20190616T232010 CREATED:20190402T173850Z LAST-MODIFIED:20190402T174305Z UID:48611-1561334400-1561766399@www.lammle.com SUMMARY:Viptela Cisco SD-WAN 5-day Intense Training 6/24 DESCRIPTION:SD-WAN: Advanced Operations & Troubleshooting Bootcamp (SDWOTS) v1.0 is a five-day course. We will cover Cisco Software-Defined WAN (SD-WAN) which is an overlay architecture that overcomes the biggest drawbacks of traditional WAN. Students will be able to operate a Cisco SD-WAN over any transport (MPLS\, Broadband\, LTE\, VSAT etc.) and provide troubleshooting\, management\, policy control and application visibility across the enterprise. \nThis hands-on Course covers the Cisco SD-WAN product and contains extensive labs to reinforce the knowledge learned. \nCourse Objectives \nUpon completing this course\, the learner will be able to meet these overall objectives: \n\nDescribe how to deploy SD-WAN\nConfigure SD-WAN environment\nDeploy Zero-Touch Provisioning\nImplement SD-WAN Security\nConfigure SD-WAN Policies\nOperate SD-WAN Devices and software\nTroubleshoot SD-WAN environment\n\n  \nCourse Outline \nModule 1: Cisco SD-WAN Introduction \n\nHigh-level Cisco SD-WAN Deployment models\nApplication level SD-WAN solution\nCisco SDWAN high availability solution\nCisco SD-WAN Scalability\nCisco SD-WAN Solution Benefits\n\nModule 2: Cisco SD-WAN Orchestration \n\nIntroduction\nvManage NMS\nvSmart Controller\nvBond Orchestrator\nController Resiliency Architecture\n\nModule 3: Site Architecture and Deployment Models \n\nSite Capabilities\nvEdge Router\nvEdge form factors\n\nModule 4: Zero Touch Provisioning \n\nOverview\nUser Input Required for the ZTP Automatic Authentication Process\nAuthentication between the vBond Orchestrator and a vEdge Router\nAuthentication between the vEdge Router and the vManage NMS\nAuthentication between the vSmart Controller and the vEdge Router\n\nModule 5: Cisco SD-WAN Solution \n\nOverlay Management Protocol (OMP)\nCisco SDWAN Circuit Aggregation Capabilities\nSecure Connectivity in Cisco SD-WAN\nPerformance Tracking Mechanisms\nApplication Discovery\nDynamic Path Selection\nPerformance Based Routing\nDynamic Cloud Access\n\nModule 6: Operations Best Practices \n\nConfig: Test Configuration Changes Before Committing\nNAT: Secure Routers Acting as NATs\nvEdge Routers: Connect to the Console Port\nvEdge Routers: Use the Poweroff Command\nViptela Devices: Site ID Naming Conventions\nViptela Devices: Using the System IP Address\nvManage NMS: Disaster Recovery\n\nModule 7: Application Monitoring \n\nvManage\nvAnalytics\nEcosystem Partner Solutions\n\nModule 8: Troubleshooting Methods \n\nRemote Access\nConsole Access\nLAN Interfaces\nWAN Interfaces\nControl Connections\n\nModule 9: General Troubleshooting \n\nCheck Application-Aware Routing Traffic\nCollect Device Data To Send to Customer Support\nMonitor Alarms and Events\nMonitor TCP Optimization\nPing a Viptela Device\nRun a Traceroute\nSimulate Flows\nTroubleshoot Cellular Interfaces\nTroubleshoot Device Bringup\nTroubleshoot WiFi Connnections\nUse Syslog Messages\nTunnel Health\n\nModule 10: Troubleshooting: Data Plane Issues      \n\nBFD Session Information\nCflowd Information\nData Policies\nDPI Information\nSymptom: Site Cannot Reach Applications in Datacenter\nSymptom: vManage Showing vEdge or Interface Down\nSymptom: Site-Wide Loss of Connectivity (Blackout)\nSymptom: Poor Application Performance (Brownout)\nIssue Severity Assessment\n\nModule 11: Troubleshooting:  Routing Issues \n\nBGP Information\nMulticast Information\nOMP Information\nOSPF Information\nPIM Information\nSymptom: Some or All Routes Missing from vEdge Routing table\nSymptom: Data Traffic Using Suboptimal Path\nSymptom: Data Traffic Not Using All Transports\n\nModule 12: Application-Aware Routing \n\nApplication Performance with CloudExpress Service\nTunnel Latency Statistics\nTunnel Loss Statistics\n\nModule 13: Interface Troubleshooting \n\nReset an Interface\nAll Interfaces\nARP Table Entries\nCellular Interface Information\nDHCP Server and Interface Information\nInterface MTU Information\nManagement Interfaces\nVRRP Information\nWAN Interfaces\n\nModule 14: Network Operations \n\nCheck Alarms and Events\nCheck User Accounts and Permissions\nDeploy the Viptela Overlay Network\nDetermine the Status of Network Sites\nControl Connections\nData Connections\nNetwork Performance with vAnalytics Platform\nOMP Status\n\nModule 15: Security Certificate Troubleshooting \n\nGenerate a Certificate\nUpload the vEdge Serial Number File\nCertificate\nCSR\n\nModule 16: Viptela Devices Maintenance \n\nDecommission a vEdge Cloud Router\nDetermine the Status of a Network Device\nLocate a Viptela Device\nMigrate a Controller’s Virtual Machine Using vMotion\nReboot a Device\nRemove a vEdge Router’s Serial Number from the vManage NMS\nReplace a vEdge Router\nRestore the vManage NMS\nSet Up User Accounts to Access Viptela Devices\nValidate or Invalidate a vEdge Router\nSoftware Versions Installed on a Device\nStatus of a vBond Orchestrator\nStatus of a vEdge Router\nStatus of a vSmart Controller\n\nModule 17: Viptela Device Operation and Troubleshooting \n\nDetermine Changes to a Configuration Template\nDetermine Why a Device Rejects a Template\nAlarm Severity Levels\nHardware Alarms\nChecking Alarms and Notifications\nLEDs\nAdditional Information\nRestore a vEdge Router\nRemove vEdge Router Components\n\nModule 18: Working With Viptela Support      \n\nCase Priority Levels and Response Times\nInformation for Opening Cases\nViptela Customer Support Portal\nOther Ways to Contact Support\n\nLab Outline \n\nIntroduction to the Cisco SD-WAN\nAdd vEdge to vManage Inventory\nControl-Plane Connectivity\nOverlay Network\nZero-Touch Provisioning\nvManage Templates\nvManage Basic Policies\nApplication Aware Policies\nAdvanced Policies\nAnalytics\nMultiTenant Mode and Tenants\nTroubleshooting Methods\nTroubleshooting Data Plane Issues\nTroubleshooting Routing Issues\nBest Practices\n\n\n\n \n URL:https://www.lammle.com/event/viptela-training-cisco-sd-wan-6-24/ LOCATION:Live Online CATEGORIES:Cisco Viptela SD-WAN END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190624 DTEND;VALUE=DATE:20190629 DTSTAMP:20190616T232010 CREATED:20190423T145705Z LAST-MODIFIED:20190611T183258Z UID:49233-1561334400-1561766399@www.lammle.com SUMMARY:Cisco CCNA R/S 5-day Bootcamp with Testing Onsite Starts 6/24/19 DESCRIPTION:Cisco CCNA Routing and Switching 5-day Bootcamp in Philly!\nThis class is available Live Online as well! \nIncludes: \n\n\n\nQTY\nDESCRIPTION\nPRICE\n\n\n\n\n1\nCisco – CCNA Routing and Switching\n$4895.00\n\n\n1\nBoson Practice Labs (1 Year Access)\nIncluded\n\n\n1\nCCNA\nIncluded\n\n\n1\nExam Preparation Study Guide\nIncluded\n\n\n1\n2 Cisco Exam Vouchers – Pearson VUE Onsite Testing\nIncluded\n\n\n1\nTodd Lammle Education Guarantee\nIncluded\n\n\n1\nThis months discount\n$-1400.00\n\n\n\n\n\nTotal\n$3495.00\n\n\n\nIncludes ALL practice questions and hands-on labs needed to pass your exams the first time! \nAlso Includes full Todd Lammle CCNA pre-study program with videos\, books\, labs and practice questions! \n\n\n \n URL:https://www.lammle.com/event/cisco-ccna-r-s-cisco-day-bootcamp-6-24/ LOCATION:PA\, Philadelphia\, United States CATEGORIES:Cisco Security Training,CCNA,CCNA R/S,Cisco ICND2,CCNA/CCNP/CCIE,CCNA Security (IINS),Cisco CCNA Boot Camp Training END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190624 DTEND;VALUE=DATE:20190628 DTSTAMP:20190616T232010 CREATED:20190510T183229Z LAST-MODIFIED:20190611T194505Z UID:49512-1561334400-1561679999@www.lammle.com SUMMARY:Cisco Firepower/FTD New 6.4 Code Intense 4-day Hands-on Class 6/24 week Live Online DESCRIPTION:4-day class\, class runs 9-4pm CST Monday-Thursday \nFriday-Saturday rack time available to students for extra lab time! \n \nOver 70-hands-on labs to help you really understand the material and how Firepower works! \nYou will learn how to administrate a Cisco Firepower and FTD environment! 6-days of rack time included! \nFirepower Class TOC May 2019 \nSingle student: $3795 \nTwo students: $3495 each \nThree students: $2995 each \nFour students: $2495 each \nFive or more\, contact for private onsite! \n\n\n \n URL:https://www.lammle.com/event/6-25-live-online/ LOCATION:Live Online CATEGORIES:Cisco Security Training,Firepower END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190625 DTEND;VALUE=DATE:20190629 DTSTAMP:20190616T232010 CREATED:20190513T011636Z LAST-MODIFIED:20190516T003140Z UID:49582-1561420800-1561766399@www.lammle.com SUMMARY:Amazon Web Services (AWS) CSAA 4-day Live Online 6/26/19 DESCRIPTION:This 4-day Live Online course will teach you how to become an AWS Certified Solutions Architect Associate! \nAWS Certified Solutions Architect\nA staggering 21.7% of respondents in the United States and Canada plan to pursue the Associate- or Professional-level of this certification in 2019. Of all cloud professionals surveyed\, 43% are cloud architects who must be able to design and deploy scalable solutions. AWS Certified Solutions Architect demonstrates those critical cloud skills have been achieved. \nAWS Certified Solutions Architect – Associate is also one of this year’s highest-paying certifications\, coming in fourth at $132\,840. Those pursuing this certification are most likely to be cross-certified in CompTIA\, Microsoft and ITIL®. \nEighty-five percent of IT professionals who hold this certification have at least six years of career experience\, and of that group\, 63% have over a decade on the job. \nWhile most certification exams focus on one primary technology\, AWS certifications often cover a couple dozen AWS services. AWS Certified Solutions Architects have verified their skills to: \n\nDesign and deploy scalable\, highly available and fault-tolerant systems on AWS.\nLift and shift of an existing on-premises application to AWS.\nSelect the appropriate AWS service based on data\, compute\, database or security requirements.\nIdentify appropriate use of AWS architectural best practices.\nEstimate AWS costs and identify cost control mechanisms.\n\nclass overview: \nMODULE 1: AWS OVERVIEW \n– How to become an AWS Certified Solutions Architect Associate\n-The evolution of AWS\n-Learn basic concepts about regions and availability zones\n-Understand the many service offerings of AWS at a high level and the use cases for each \nMODULE 2: SECURITY BASICS WITH AWS IAM \n-Understand the importance of a strong security posture\n-Understand the basic features of Identity and Access Management (IAM) including multi-factor authentication\, usernames and passwords\, and permissions \nHands-on Lab 1: Introduction to AWS Identity and Access Management (IAM) \nMODULE 3: STORAGE \n-Learn about S3 simple file storage and identify durability characteristics and use cases\n-Understand objects and the components that they include such as keys\, values\, versions\, and metadata\n-Define an S3 bucket and learn how to configure them in the AWS Console\n-Understand how to secure an S3 bucket\n-Differentiate between S3 tiers including Infrequent Access\, Reduced Redundancy\, and Glacier\n-Understand the CloudFront Content Delivery Network and how it can be used to improve website performance\n-Understand the use cases for a Gateway Stored Volumes\, Gateway Cached Volumes\, and Virtual Tape Libraries\n-Differentiate Import/Export\, Snowball\, and Transfer Acceleration\, and how each can be used to move large amounts of data into AWS \nHands-on Lab 2: Introduction to Amazon Simple Storage Service (S3) \nHands-on Lab 3: S3: Multi-region Storage Backup with Cross-Region Replication \nHands-on Lab 4: Introduction to AWS Key Management Service \nHands-on Lab 5: Introduction to CloudFront \nMODULE 4: EC2 \n-Understand virtual server and EC2 instance concepts\n-Differentiate EC2 tiers and their use cases\n-Understand Reserved and Spot Instances\n-Differentiate EC2 instance types that are optimized for different workloads\n-Understand gp2\, io1\, and st1 volume types\n-Create virtual disks for an instance \n-Create a Windows EC2 instance\n-Configure a RAID array\n-Create an EC2 Instance Store\n-Create a custom AMI \n-Configure a Security Group that controls inbound and outbound traffic\n-Apply a Security Group to one or more EC2 instances\n-Understand the concept of a Stateful Firewall \nHands-on Lab 6: Introduction to Amazon EC2 \nHands-on Lab 7: Working with Amazon Elastic Block Store (EBS) \nMODULE 5: MANAGING EC2 INSTANCES \n-Configure Elastic Load Balancer and use health checks to monitor instances\n-Understand CloudWatch and use it to monitor resources and applications\n-Log AWS API calls using CloudTrail\n-Monitor traffic within a VPC using VPC Flow Logs \n-Use the AWS Command Line to manage EC2 instances\n-Use Auto Scaling to increase or reduce EC2 capacity based on conditions that you configure \nHands-on Lab 8: Working with Elastic Load Balancing \nHands-on Lab 9: EC2 Auto Scaling \nMODULE 6: ROUTE53 \n-Learn the fundamentals of DNS\n-Configure a hosted zone in Route53\n-Modify DNS records\n-Differentiate and configure Route53 Routing Policies \nHands-on Lab 10: Working with Route53 \nMODULE 7: DATABASE SERVICES \n-Understand different database types\n-Create an RDS Instance\n-Back-up and take snapshots of RDS database instances\n-Scale-out RDS using Read Replicas \n-Use Multi-AZ RDS to create a highly-available database service \n-Understand DynamoDB concepts\n-Create a DynamoDB table\n-Understand Elasticache at a high level\n-Create an Aurora instance that is compatible with MySQL \nHands-on Lab 11: RDS\nHands-on Lab 12: DynamoDB\nHands-on Lab 13: Aurora \nMODULE 8: VIRTUAL PRIVATE CLOUD \n-Create a logically isolated section of the AWS cloud and define your own virtual network\n-Create different network zones for publicly accessible instances and backend systems\n-Connect your site to the Virtual Private Cloud (VPC) over a secure Virtual Private Network (VPN)\n-Configure Network Address Translation (NAT) to translate public IP addresses to a private IP address range\n-Create an Access Control List (ACL) to secure a network \nHands-on Lab 14: Build a VPC\nHands-on Lab 15: Audit your AWS Environment \nMODULE 9: AWS APPLICATION SERVICES \n-Understand the value of creating de-coupled applications \n-Create a messaging queue using Amazon Simple Queuing Service (SQS) \n-Use Simple Workflow (SWF) to order complex processes\n-Send email\, text\, and HTTP notifications and alerts using Simple Notification Service (SNS)\n-Import code and automatically create AWS resources using Elastic Beanstalk \n-Create templates that ca be used to automate the entire AWS infrastructure using Cloud Formation \n-Use Lambda to create serverless functions and eliminate management tasks and resource waste \n-Use Elastic Transcoder to convert media into a variety of different formats \nHands-on Lab 16: Build a VPC using Cloud Formation \n\n\n \n URL:https://www.lammle.com/event/amazon-web-services-aws-csaa-4-day-live-online-6-26-19/ LOCATION:Live Online CATEGORIES:AWS,AWS Certified SysOps Administrator Associate Bootcamp END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190708 DTEND;VALUE=DATE:20190713 DTSTAMP:20190616T232010 CREATED:20190423T145003Z LAST-MODIFIED:20190423T145202Z UID:49223-1562544000-1562975999@www.lammle.com SUMMARY:Cisco ICND1 (CCENT) 5-day Training starts 7/8/19 DESCRIPTION:Interconnecting Cisco Networking Devices\, Part 1 (ICND1) v3.0 is a five-day\, instructor-led training course\, plus 1 year access to a self-paced video\, searchable text\, and lab bundle that teaches learners how to install\, operate\, configure\, and verify a basic IPv4 and IPv6 network\, including configuring a LAN switch\, configuring an IP router\, managing network devices\, and identifying basic security threats. \nThis high-impact\, ICND1 training course provides the foundational understanding of network layers 1-3 that are applicable to core routing and switching\, plus other advanced technologies. Several topics have been added in the latest version of this CCNA networking course\, including understanding the interactions and network functions of firewalls\, wireless controllers and access points\, along with additional focus on IPv6 and basic network security.  All configuration commands are introduced through examples and supported with lab exercises. \nObjectives include: \n\nDescribe network fundamentals and build simple LANs\nEstablish Internet connectivity\nManage and secure network devices\nExpand small to medium sized networks\nDescribe IPv6 basics\n\n\n\n \n URL:https://www.lammle.com/event/cisco-icnd1-ccent-5-day-training-starts-7-8/ LOCATION:Live Online CATEGORIES:Cisco ICND1 END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190708 DTEND;VALUE=DATE:20190713 DTSTAMP:20190616T232010 CREATED:20190611T182635Z LAST-MODIFIED:20190611T183036Z UID:50131-1562544000-1562975999@www.lammle.com SUMMARY:Cisco CCNA R/S 5-day Bootcamp Live Online Starts 7/8/19 DESCRIPTION:Cisco CCNA Routing and Switching Live Online\nIncludes: \n\n\n\nQTY\nDESCRIPTION\nPRICE\n\n\n\n\n1\nCisco – CCNA Routing and Switching\n$4895.00\n\n\n1\nBoson Practice Labs (1 Year Access)\nIncluded\n\n\n1\nCCNA\nIncluded\n\n\n1\nExam Preparation Study Guide\nIncluded\n\n\n1\nCisco Exam Vouchers – Pearson VUE Onsite Testing\nNOT Included\n\n\n1\nTodd Lammle Education Guarantee\nIncluded\n\n\n1\nThis months discount\n$-1800.00\n\n\n\n\n\nTotal\n$2995.00\n\n\n\nIncludes ALL practice questions and hands-on labs needed to pass your exams the first time! \nAlso Includes full Todd Lammle CCNA pre-study program with videos\, books\, labs and practice questions! \n\n\n \n URL:https://www.lammle.com/event/cisco-ccna-r-s-cisco-day-bootcamp-7-8/ LOCATION:Online CATEGORIES:Cisco Security Training,CCNA,CCNA R/S,Cisco ICND2,CCNA/CCNP/CCIE,CCNA Security (IINS),Cisco CCNA Boot Camp Training END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190715 DTEND;VALUE=DATE:20190722 DTSTAMP:20190616T232010 CREATED:20190213T220803Z LAST-MODIFIED:20190213T220948Z UID:48099-1563148800-1563753599@www.lammle.com SUMMARY:CompTIA A+/Network+ Certification 7-day Bootcamp starts 7/15 in PA! DESCRIPTION:Our 7-Day A+/Network+ Certification Boot Camp covers baseline skills needed by IT professionals to perform critical IT support & networking tasks. \nCOMPTIA THREE EXAMS COVERED: CompTIA A+ Core (220-1001) – covers mobile devices\, networking technology\, hardware\, virtualization and cloud computing and network troubleshooting. CompTIA A+ Core (220-1002) – covers installing and configuring operating systems\, expanded security\, software troubleshooting and operational procedures. \nThe third exams is CompTIA Network+ (N10-007) – covers networking\, critical security\, cloud computing\, and virtualization technologies. \nWhat’s Included: \n\n\n\n1\nCompTIA – A+/Network+ Boot Camp\n$4295.00\n\n\n1\nCustomized Official CompTIA A+/Network+ Courseware\nIncluded\n\n\n1\nCompTIA Exam Review/Lab Guide\nIncluded\n\n\n1\nSelf-Paced e-Learning Package for CompTIA A+/Network+\nIncluded\n\n\n1\nRealistic Exam Preparation Software with over 600+ updated practice questions\nIncluded\n\n\n1\nOfficial CompTIA A+ and Network+ Examination Vouchers\nIncluded\n\n\n1\nOnsite Delivery of CompTIA A+/Network+ Examinations\, via Pearson VUE\nIncluded\n\n\n1\nA+/Network+ Certification Guarantee\nIncluded\n\n\n1\n$1000 Promotional Discount\n$-1000.00\n\n\n\n\n\nTotal\n$3295.00\n\n\n\n\n\n \n URL:https://www.lammle.com/event/comptia-a-network-certification-7-day-bootcamp-starts-7-15/ LOCATION:PA\, Philadelphia\, United States CATEGORIES:CompTIA END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190715 DTEND;VALUE=DATE:20190727 DTSTAMP:20190616T232010 CREATED:20190423T141224Z LAST-MODIFIED:20190423T142110Z UID:49181-1563148800-1564185599@www.lammle.com SUMMARY:Cisco CCNP R/S 12-day Certification Bootcamp starts 7/15/19 DESCRIPTION:\n12 Day Accelerated Program for Cisco’s CCNP Routing and Switching Certification is an intensive course delivered in our proprietary Lecture\, Lab\, Review (exam-focused) format. Given our nearly 22 years experience in preparing students to achieve the CCNP certification\, our instructors\, courseware\, and lab sessions are all uniquely tailored to give students the highest probability of success. \nThis extended-hour lab-based program covers the CCNP certification requirements in an environment designed enhance your learning experience. During the program\, students will acquire the knowledge and skills related to plan\, implement\, verify and troubleshoot local and wide-area enterprise networks and work collaboratively with specialists on advanced security\, voice\, wireless and video solutions. \nThe routing and switching protocol knowledge from this certification will provide a lasting foundation as these skills are equally relevant in the physical networks of today and the virtualized network functions of tomorrow. \n\n\nCCNP CERTIFICATION COURSE\nUpon successfully passing the required exams\, students leave this program with Cisco’s CCNP Routing and Switching certification. \nWHAT’S INCLUDED\n\nCCNP Routing & Switching Courseware (electronic format)\nCCNP Routing & Switching Practice Labs (1 Year Access)\nCCNP Routing & Switching Exam Preparation Study Guide\nCisco CCNP Routing & Switching Evening Exam Review Sessions\nCisco 300-101 ROUTE Exam Voucher\nCisco 300-115 SWITCH Exam Voucher\nCisco 300-135 TSHOOT Exam Voucher\nCCNP Routing & Switching Exam Support\nCCNP Routing & Switching Exam Pass Guarantee\nCPE/CEU Post Class Package\n\n\n  \n\n\n\nQTY\nDESCRIPTION\nPRICE\n\n\n\n\n1\nCisco – CCNP Routing And Switching Boot Camp\n$8995.00\n\n\n1\nCisco Exam Preparation Study Guide\nIncluded\n\n\n1\nEvening Review W/ Cisco CCNP Practice Exams\nIncluded\n\n\n1\n3 Cisco Exam Vouchers – Pearson VUE Onsite Testing\nIncluded\n\n\n\n\n\n\n\n1\nSelect Course Events Only\n$-2500.00\n\n\n\n\n\nTotal\n$6495.00\n\n\n\n\n\n \n URL:https://www.lammle.com/event/csico-ccnp-r-s-12-day-7-15/ LOCATION:PA\, Philadelphia\, United States CATEGORIES:CCNP R/S,CCNA/CCNP/CCIE END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190715 DTEND;VALUE=DATE:20190718 DTSTAMP:20190616T232010 CREATED:20190501T233513Z LAST-MODIFIED:20190501T233854Z UID:49373-1563148800-1563407999@www.lammle.com SUMMARY:Viptela Cisco SD-WAN 3-day Intro Training 7/15/19 DESCRIPTION:This Viptela training is targeted to engineers and technical personnel involved in deploying\, implementing\, operating and optimizing Cisco SD-WAN solution (Viptela)\, both in enterprise and Service Provider environments\, including advanced features for Multi-tenant deployment\, QoS\, application performance routing\, configuration templates\, control policies and troubleshooting common operating issues. \nThe Cisco SD-WAN course is lab-intensive\, and objectives are accomplished mainly through hands on learning. Students taking this Viptela training course should be familiar with Wide Area Networks (WANs) in a variety of ways\, which can be found below. \nIdeal candidates for this course include engineering and planning teams who evaluate WAN evolution\, personnel involved in SD-WAN Design\, Implementation and Operation\, and others. \nCourse Objectives \nUpon completing this course\, the learner will be able to meet these overall objectives: \n\nKnow and understand Cisco’s SD-WAN concepts\, features\, benefits\, terminology and the way this approach innovates common administrative tasks on today’s networks.\nDifferentiate and explain each of the building blocks of SD-WAN Solution\nExplain the concept of “Fabric” and the different node types that conform it (Fabric Edge Nodes\, Control Plane Nodes\, Management Nodes and Orchestration Nodes)\nIdentify the roles and functions of vEdge\, vSmart\, vManage and vBond entities\nKnow and understand the Zero Touch Provisioning Model\nKnow and understand the Zero Trust Provisioning Model\nIdentify Overlay Management Protocol (OMP) as a key element of the SD-WAN solution and the role it plays for Control Plane setup\nUnderstand segmentation of SD-WAN fabric\, through the use of VPN’s (VRF’s)\nUnderstand the role that templates have in SD-WAN solution\, differentiate templates and know how to apply them\nDifferentiate Control\, Data and Application Route Policies and know how they are used in SD-WAN\nIdentify and apply QoS mechanisms to SD-WAN fabric\nDiscuss Use Cases for SD-WAN\n\nModule 1: SD-WAN Solution Overview \n\nTraditional WAN – Challenges\nSD-WAN Overview and definitions\nSD-WAN Benefits\nSD-WAN Key Concepts\nSD-WAN Main Components\n\nvEdge\nvSmart\nvManage\nvBond\n\n\nOn-Premise vs. Cloud-based Control Plane\n\nModule 2: SD-WAN Licensing Model \n\nPricing Model\nLicense Options by Features\nLicense Options by Bandwidth capacity\n\nModule 3: Secure Control Plane Bring-Up \n\nZero Trust Security Principles\nSecure Control Channels\nEstablishing vEdge Router Identity\nEstablishing Control Elements Identities (vBond\, vSmart\, vEdge)\nSecure Control Channel between vEdge Router and vBond\nSecure Control Channel between vEdge Router and vSmart/vManage\n\nModule 4: Secure Data Plane Bring-Up \n\nLimitations of traditional key exchange mechanisms (IKE)\nSD-WAN new centralized Encryption key distribution\nTraffic Encryption for data privacy\nAuthentication Header for Data Plane Integrity\nAnti-Replay Protection (man-in-the-middle)\nRole of Bidirectional Forwarding Detection (BFD)\nConsiderations about MTU and MSS\nEnd to End Segmentation (VPN’s)\nRole of Application Visibility and Recognition\nInfrastructure DDoS Mitigation\nSecurity Policies and Services\nCloud Security: Secure Direct Internet Access\n\nModule 5: Overlay Management Protocol (OMP) \n\nDefinition of overlay routing\nRole and characteristics of Overlay Management Protocol (OMP)\nOMP Advertised Routes\nRoute Redistribution (edge routing protocol to OMP and vice versa)\nBest Path Algorithm\n\nModule 6: Using Templates \n\nBasic Elements in the configuration for any device\nNeed for Templates\nOptions to Apply Templates to Devices\nOverview of Feature Templates\nCategories of Feature Templates\nWorkflow for Applying Templates to Devices\n\nModule 7: Using Policies \n\nPolicy Architecture\nApplication Aware Routing Policies\nControl Policies\nData Policies\nVPN Membership Policies\nRouting Policies\nCflowd Templates\n\nModule 8: Quality of Service (QoS) \n\nQoS Pipeline – vEdge Router\nData Packet Flow\nQueueing Management\nControl Traffic Prioritization\nRandom Early Detection (RED)\nTraffic Policing\nTraffic Shaping\nMarking and Remarking\nClass-Map\nQoS Scheduler\nQoS Map\nApplying QoS policies\n\nModule 9: Basic Troubleshooting \n\nTroubleshooting Control Plane Bring Up\nGUI validation in vManage\nCLI validation with “Show” commands in vEdge Router\nTroubleshooting Data Plane\nTroubleshooting OMP\n\nModule 10: Additional Topics \n\nSolution Redundancy\nControl Policies\nRoute Filtering\nTLOC\nDirect Internet Access (DIA)\nBFD\nContrasting Cisco IWAN with Viptela SD-WAN approach\nComparing Cisco’s SD-WAN with other vendors solutions\n\nModule 11: Cloud on Ramp \nModule 12: Use Cases & Design \n\nGuest Wi-Fi\nBandwidth Augmentation\nCloud onRamp for SAAS\nCritical Applications SLA\nRegional Secure Perimeter\n\nModule 13: Multi-Tenancy \n\nMulti-Tenant Mode\nCreating Tenants\nAdding Controller\nAdding Vedges\nRBAC\n\nModule 14: vAnalytics and Rest API \n\nvAnalytics\nDashboard\nData Analytics\nvManage Rest API\n\nLab Outline \n\nLab 1: Accessing the Lab Devices\nLab 2: Reset vEdge Cloud Router\nLab 3: Remove vEdge Router from vManage Inventory\nLab 4: Add vEdge Router to vManage Inventory\nLab 5: Configure and Deploy Control-Plane Connectivity\nLab 6: Configure and Deploy an Overlay Network\nLab 7: Provision and Deploy vManage Templates\nLab 8: Provision and Deploy vManage Policies\nLab 9: Deploy Multi-Tenant vManage\n\n\n\n \n URL:https://www.lammle.com/event/viptela-training-cisco-sd-wan-15-19/ LOCATION:Live Online CATEGORIES:Cisco Viptela SD-WAN END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190715 DTEND;VALUE=DATE:20190720 DTSTAMP:20190616T232010 CREATED:20190611T183337Z LAST-MODIFIED:20190611T183618Z UID:50137-1563148800-1563580799@www.lammle.com SUMMARY:Cisco CCNA R/S 5-day Bootcamp with Testing Onsite Starts 7/15/19 DESCRIPTION:Cisco CCNA Routing and Switching 5-day Bootcamp in Wash D.C.!\nThis class is available Live Online as well! \nIncludes: \n\n\n\nQTY\nDESCRIPTION\nPRICE\n\n\n\n\n1\nCisco – CCNA Routing and Switching\n$4895.00\n\n\n1\nBoson Practice Labs (1 Year Access)\nIncluded\n\n\n1\nCCNA\nIncluded\n\n\n1\nExam Preparation Study Guide\nIncluded\n\n\n1\n2 Cisco Exam Vouchers – Pearson VUE Onsite Testing\nIncluded\n\n\n1\nTodd Lammle Education Guarantee\nIncluded\n\n\n1\nThis months discount\n$-1400.00\n\n\n\n\n\nTotal\n$3495.00\n\n\n\nIncludes ALL practice questions and hands-on labs needed to pass your exams the first time! \nAlso Includes full Todd Lammle CCNA pre-study program with videos\, books\, labs and practice questions! \n\n\n \n URL:https://www.lammle.com/event/cisco-ccna-r-s-cisco-day-bootcamp-6-24-copy/ LOCATION:Washington D.C.\, DC\, United States CATEGORIES:Cisco Security Training,CCNA,CCNA R/S,Cisco ICND2,CCNA/CCNP/CCIE,CCNA Security (IINS),Cisco CCNA Boot Camp Training END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190716 DTEND;VALUE=DATE:20190720 DTSTAMP:20190616T232010 CREATED:20190611T193414Z LAST-MODIFIED:20190612T190712Z UID:50169-1563235200-1563580799@www.lammle.com SUMMARY:Todd Lammle Cisco CCNA R/S 4-day Live Online Starts 7/16/19 Special Discounted class! DESCRIPTION:Todd Lammle Cisco CCNA R/S Live Online – in combination with Lazaro Diaz!\nonly $995.00!! \nIncludes ALL practice questions and hands-on labs needed to pass your exams the first time! \nAlso Includes full Todd Lammle FULL CCNA study program with videos\, books\, labs and practice questions! \n\nFour days\, Tues-Fri 7/16-19\nClass runs 9-6pm CST Live Online\n\nDon’t miss this featured class! \n\nBest CCNA Book \n\n  \n\n\n \n URL:https://www.lammle.com/event/cisco-ccna-r-s-cisco-day-bootcamp-7-16/ LOCATION:Online CATEGORIES:Cisco Security Training,CCNA,CCNA R/S,Cisco ICND2,CCNA/CCNP/CCIE,CCNA Security (IINS),Cisco CCNA Boot Camp Training END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190722 DTEND;VALUE=DATE:20190726 DTSTAMP:20190616T232010 CREATED:20190213T223636Z LAST-MODIFIED:20190213T223804Z UID:48116-1563753600-1564099199@www.lammle.com SUMMARY:CompTIA A+ Certification Boot Camp start 7/22 Live Online DESCRIPTION:Our 4-Day A+ Certification Boot Camp covers baseline skills needed by IT professionals to perform critical IT support tasks. The updated CompTIA A+ is the preferred qualifying credential for technical support and IT operational roles. \nThe A+ certification has evolved into much more than a basic PC repair credential. \nCOMPTIA EXAMS COVERED:\nCompTIA A+ Core (220-1001) – covers mobile devices\, networking technology\, hardware\, virtualization and cloud computing and network troubleshooting. CompTIA A+ Core (220-1002) – covers installing and configuring operating systems\, expanded security\, software troubleshooting and operational procedures. \n\n\n\n1\nCompTIA – A+ Boot Camp (Live Online)\n$3295.00\n\n\n1\nCompTIA A+ Courseware\nIncluded\n\n\n1\nCompTIA A+ Exam Prep Review Sessions\nIncluded\n\n\n1\nCompTIA A+ Practice Exams\nIncluded\n\n\n1\nCompTIA A+ Exam Vouchers ($438 Value)\nIncluded\n\n\n1\nEducation Guarantee\nIncluded\n\n\n1\nCompTIA Promo Offer\n$-1597.00\n\n\n\n\n\nTotal\n$1698.00\n\n\n\n\n\n \n URL:https://www.lammle.com/event/comptia-a-certification-boot-camp-start7-22-online/ LOCATION:Live Online CATEGORIES:CompTIA END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190722 DTEND;VALUE=DATE:20190727 DTSTAMP:20190616T232010 CREATED:20190402T174439Z LAST-MODIFIED:20190402T174833Z UID:48616-1563753600-1564185599@www.lammle.com SUMMARY:Viptela Cisco SD-WAN 5-day Intense Training 7/22 DESCRIPTION:SD-WAN: Advanced Operations & Troubleshooting Bootcamp (SDWOTS) v1.0 is a five-day course. We will cover Cisco Software-Defined WAN (SD-WAN) which is an overlay architecture that overcomes the biggest drawbacks of traditional WAN. Students will be able to operate a Cisco SD-WAN over any transport (MPLS\, Broadband\, LTE\, VSAT etc.) and provide troubleshooting\, management\, policy control and application visibility across the enterprise. \nThis hands-on Course covers the Cisco SD-WAN product and contains extensive labs to reinforce the knowledge learned. \nCourse Objectives \nUpon completing this course\, the learner will be able to meet these overall objectives: \n\nDescribe how to deploy SD-WAN\nConfigure SD-WAN environment\nDeploy Zero-Touch Provisioning\nImplement SD-WAN Security\nConfigure SD-WAN Policies\nOperate SD-WAN Devices and software\nTroubleshoot SD-WAN environment\n\n  \nCourse Outline \nModule 1: Cisco SD-WAN Introduction \n\nHigh-level Cisco SD-WAN Deployment models\nApplication level SD-WAN solution\nCisco SDWAN high availability solution\nCisco SD-WAN Scalability\nCisco SD-WAN Solution Benefits\n\nModule 2: Cisco SD-WAN Orchestration \n\nIntroduction\nvManage NMS\nvSmart Controller\nvBond Orchestrator\nController Resiliency Architecture\n\nModule 3: Site Architecture and Deployment Models \n\nSite Capabilities\nvEdge Router\nvEdge form factors\n\nModule 4: Zero Touch Provisioning \n\nOverview\nUser Input Required for the ZTP Automatic Authentication Process\nAuthentication between the vBond Orchestrator and a vEdge Router\nAuthentication between the vEdge Router and the vManage NMS\nAuthentication between the vSmart Controller and the vEdge Router\n\nModule 5: Cisco SD-WAN Solution \n\nOverlay Management Protocol (OMP)\nCisco SDWAN Circuit Aggregation Capabilities\nSecure Connectivity in Cisco SD-WAN\nPerformance Tracking Mechanisms\nApplication Discovery\nDynamic Path Selection\nPerformance Based Routing\nDynamic Cloud Access\n\nModule 6: Operations Best Practices \n\nConfig: Test Configuration Changes Before Committing\nNAT: Secure Routers Acting as NATs\nvEdge Routers: Connect to the Console Port\nvEdge Routers: Use the Poweroff Command\nViptela Devices: Site ID Naming Conventions\nViptela Devices: Using the System IP Address\nvManage NMS: Disaster Recovery\n\nModule 7: Application Monitoring \n\nvManage\nvAnalytics\nEcosystem Partner Solutions\n\nModule 8: Troubleshooting Methods \n\nRemote Access\nConsole Access\nLAN Interfaces\nWAN Interfaces\nControl Connections\n\nModule 9: General Troubleshooting \n\nCheck Application-Aware Routing Traffic\nCollect Device Data To Send to Customer Support\nMonitor Alarms and Events\nMonitor TCP Optimization\nPing a Viptela Device\nRun a Traceroute\nSimulate Flows\nTroubleshoot Cellular Interfaces\nTroubleshoot Device Bringup\nTroubleshoot WiFi Connnections\nUse Syslog Messages\nTunnel Health\n\nModule 10: Troubleshooting: Data Plane Issues      \n\nBFD Session Information\nCflowd Information\nData Policies\nDPI Information\nSymptom: Site Cannot Reach Applications in Datacenter\nSymptom: vManage Showing vEdge or Interface Down\nSymptom: Site-Wide Loss of Connectivity (Blackout)\nSymptom: Poor Application Performance (Brownout)\nIssue Severity Assessment\n\nModule 11: Troubleshooting:  Routing Issues \n\nBGP Information\nMulticast Information\nOMP Information\nOSPF Information\nPIM Information\nSymptom: Some or All Routes Missing from vEdge Routing table\nSymptom: Data Traffic Using Suboptimal Path\nSymptom: Data Traffic Not Using All Transports\n\nModule 12: Application-Aware Routing \n\nApplication Performance with CloudExpress Service\nTunnel Latency Statistics\nTunnel Loss Statistics\n\nModule 13: Interface Troubleshooting \n\nReset an Interface\nAll Interfaces\nARP Table Entries\nCellular Interface Information\nDHCP Server and Interface Information\nInterface MTU Information\nManagement Interfaces\nVRRP Information\nWAN Interfaces\n\nModule 14: Network Operations \n\nCheck Alarms and Events\nCheck User Accounts and Permissions\nDeploy the Viptela Overlay Network\nDetermine the Status of Network Sites\nControl Connections\nData Connections\nNetwork Performance with vAnalytics Platform\nOMP Status\n\nModule 15: Security Certificate Troubleshooting \n\nGenerate a Certificate\nUpload the vEdge Serial Number File\nCertificate\nCSR\n\nModule 16: Viptela Devices Maintenance \n\nDecommission a vEdge Cloud Router\nDetermine the Status of a Network Device\nLocate a Viptela Device\nMigrate a Controller’s Virtual Machine Using vMotion\nReboot a Device\nRemove a vEdge Router’s Serial Number from the vManage NMS\nReplace a vEdge Router\nRestore the vManage NMS\nSet Up User Accounts to Access Viptela Devices\nValidate or Invalidate a vEdge Router\nSoftware Versions Installed on a Device\nStatus of a vBond Orchestrator\nStatus of a vEdge Router\nStatus of a vSmart Controller\n\nModule 17: Viptela Device Operation and Troubleshooting \n\nDetermine Changes to a Configuration Template\nDetermine Why a Device Rejects a Template\nAlarm Severity Levels\nHardware Alarms\nChecking Alarms and Notifications\nLEDs\nAdditional Information\nRestore a vEdge Router\nRemove vEdge Router Components\n\nModule 18: Working With Viptela Support      \n\nCase Priority Levels and Response Times\nInformation for Opening Cases\nViptela Customer Support Portal\nOther Ways to Contact Support\n\nLab Outline \n\nIntroduction to the Cisco SD-WAN\nAdd vEdge to vManage Inventory\nControl-Plane Connectivity\nOverlay Network\nZero-Touch Provisioning\nvManage Templates\nvManage Basic Policies\nApplication Aware Policies\nAdvanced Policies\nAnalytics\nMultiTenant Mode and Tenants\nTroubleshooting Methods\nTroubleshooting Data Plane Issues\nTroubleshooting Routing Issues\nBest Practices\n\n\n\n \n URL:https://www.lammle.com/event/viptela-training-cisco-sd-wan-7-22/ LOCATION:Live Online CATEGORIES:Cisco Viptela SD-WAN END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190722 DTEND;VALUE=DATE:20190727 DTSTAMP:20190616T232010 CREATED:20190423T152907Z LAST-MODIFIED:20190423T153043Z UID:49238-1563753600-1564185599@www.lammle.com SUMMARY:Implementing and Configuring Cisco Identity Services Engine (SISE) 7/22/19 DESCRIPTION:Cisco Security Training\nImplementing and Configuring Cisco Identity Services Engine (SISE) v2.4 is a 5-day Cisco ISE training program that discusses the Cisco Identity Services Engine\, an identity and access control policy platform that provides a single policy plane across the entire organization\, combining multiple services\, including authentication\, authorization\, and accounting (AAA)\, posture\, profiling\, device on-boarding\, and guest management\, into a single context-aware identity-based platform. \n*Add Cisco FTD/Firepower to this training!* \nCourse Outline\nModule 1: Introducing Cisco ISE Architecture and Deployment \nLesson 1: Using Cisco ISE as a Network Access Policy Engine\nLesson 2: Introducing Cisco ISE Deployment Models\nModule 2: Cisco ISE Policy Enforcement \nLesson 1: Introducing 802.1x and MAB Access: Wired and Wireless\nLesson 2: Introducing Identity Management\nLesson 3: Configuring Certificate Services\nLesson 4: Introducing Cisco ISE Policy\nLesson 5: Configuring Cisco ISE Policy Sets\nLesson 6: Implementing Third-Party Network Access Device Support\nLesson 7: Introducing Cisco TrustSec\nLesson 8: Introducing EasyConnect\nModule 3: Web Authentication and Guest Services \nLesson 1: Introducing Web Access with Cisco ISE\nLesson 2: Introducing ISE Guest Access Components\nLesson 3: Configuring Guest Access Settings\nLesson 4: Configuring Portals: Sponsors and Guests\nModule 4: Cisco ISE Profiler \nLesson 1: Introducing Cisco ISE Profiler\nLesson 2: Configuring Cisco ISE Profiling\nModule 5: Cisco ISE BYOD \nLesson 1: Introducing the Cisco ISE BYOD Process\nLesson 2: Describing BYOD Flow\nLesson 3: Configuring My Devices Portal Settings\nLesson 4: Configuring Certificates in BYOD Scenarios\nModule 6: Cisco ISE Endpoint Compliance Services \nLesson 1: Introducing Endpoint Compliance\nLesson 2: Configuring Client Posture Services and Provisioning in Cisco ISE\nModule 7: Cisco ISE with AMP and VPN-Based Services \nLesson 1: Introducing VPN Access Using Cisco ISE\nLesson 2: Configuring Cisco AMP for ISE\nModule 8: Cisco ISE Integrated Solutions with APIs \nLesson 1: Introducing Location-Based Authorization\nLesson 2: Introducing Cisco ISE 2.x pxGrid\nModule 9: Working with Network Access Devices \nLesson 1: Configuring TACACS+ for Cisco ISE Device Administration\nModule 10: Cisco ISE Design \nLesson 1: Designing and Deployment Best Practices\nLesson 2: Performing Cisco ISE Installation and Configuration Best Practices\nLesson 3: Deploying Failover and High-Availabilty\nModule 11: Configuring Third Party NAD Support \nLesson 1: Configuring Third-Party NAD Support \nLab Outline \nLab 1: Configure Initial Cisco ISE setup\, GUI familiarization\, system certificate usage \nLab 2: Integrate Cisco ISE with Active Directory \nLab 3: Configure Basic Policy on Cisco ISE \nLab 4: Configure Conversion to Policy Sets \nLab 5: Configure Access Policy for Easy Connect \nLab 6: Configure Guest Access \nLab 7: Configure Guest Access Operations \nLab 8: Create Guest Reports \nLab 9: Configure Profiling \nLab 10: Customize the Cisco ISE Profiling Configuration \nLab 11: Create Cisco ISE Profiling Reports \nLab 12: Configure BYOD \nLab 13: Blacklisting a Device \nLab 14: Configure Compliance Services on Cisco ISE \nLab 15: Configure Client Provisioning \nLab 16: Configure Posture Policies \nLab 17: Test and Monitor Compliance Based Access \nLab 18: Test Compliance Policy \nLab 19: Configure Cisco ISE for VPN Access \nLab 20: Configure Threat-Centric NAC using Cisco AMP (Optional) \nLab 21: Configure Cisco ISE pxGrid and Cisco WSA Integration \nLab 22: Configure Cisco ISE for Basic Device Administration \nLab 23: Configure TACACS+ Command Authorization \n\n\n \n URL:https://www.lammle.com/event/7-22/ LOCATION:Online CATEGORIES:Cisco Security Training,ISE,CCIE Security,CCNP Security,CCNA Security (IINS) END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190723 DTEND;VALUE=DATE:20190727 DTSTAMP:20190616T232010 CREATED:20190510T182624Z LAST-MODIFIED:20190602T212320Z UID:49507-1563840000-1564185599@www.lammle.com SUMMARY:Cisco Firepower/FTD New 6.4 Code Intense Hands-on Class 7/23 week Live Online DESCRIPTION:4-day class\, class runs 9-4pm CST Tues-Fri \nSat rack time available to students for extra lab time! \n \nOver 70-hands-on labs to help you really understand the material and how Firepower works! \nYou will learn how to administrate a Cisco Firepower and FTD environment! 5-days of rack time included! \nFirepower Class TOC May 2019 \nSingle student: $3795 \nTwo students: $3495 each \nThree students: $2995 each \nFour students: $2495 each \nFive or more\, contact for private onsite! \n\n\n \n URL:https://www.lammle.com/event/7-23-live-online/ LOCATION:Live Online CATEGORIES:Cisco Security Training,Firepower END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190805 DTEND;VALUE=DATE:20190810 DTSTAMP:20190616T232010 CREATED:20190611T183713Z LAST-MODIFIED:20190611T184004Z UID:50142-1564963200-1565395199@www.lammle.com SUMMARY:Cisco CCNA R/S 5-day Bootcamp with Testing Onsite Starts 8/5/19 DESCRIPTION:Cisco CCNA Routing and Switching 5-day Bootcamp in Philly!\nThis class is available Live Online as well! \nIncludes: \n\n\n\nQTY\nDESCRIPTION\nPRICE\n\n\n\n\n1\nCisco – CCNA Routing and Switching\n$4895.00\n\n\n1\nBoson Practice Labs (1 Year Access)\nIncluded\n\n\n1\nCCNA\nIncluded\n\n\n1\nExam Preparation Study Guide\nIncluded\n\n\n1\n2 Cisco Exam Vouchers – Pearson VUE Onsite Testing\nIncluded\n\n\n1\nTodd Lammle Education Guarantee\nIncluded\n\n\n1\nThis months discount\n$-1400.00\n\n\n\n\n\nTotal\n$3495.00\n\n\n\nIncludes ALL practice questions and hands-on labs needed to pass your exams the first time! \nAlso Includes full Todd Lammle CCNA pre-study program with videos\, books\, labs and practice questions! \n\n\n \n URL:https://www.lammle.com/event/cisco-ccna-r-s-cisco-day-bootcamp-8-5/ LOCATION:PA\, Philadelphia\, United States CATEGORIES:Cisco Security Training,CCNA,CCNA R/S,Cisco ICND2,CCNA/CCNP/CCIE,CCNA Security (IINS),Cisco CCNA Boot Camp Training END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190819 DTEND;VALUE=DATE:20190901 DTSTAMP:20190616T232010 CREATED:20181230T183038Z LAST-MODIFIED:20190210T221726Z UID:47083-1566172800-1567295999@www.lammle.com SUMMARY:CCNP Security 12-day Bootcamp with Testing Onsite! Starts 8/19/19 DESCRIPTION:CCNP Security Boot Camp\nOur 12-Day CCNP Security Certification Boot Camp covers security in routers\, switches\, networking devices and appliances\, as well as choosing\, deploying\, supporting and troubleshooting Firewalls\, VPNS\, and IDS/IPS solutions in larger networking environments. \nThese security topics are merged with our award-winning comprehensive exam preparation for the Cisco CCNP Security certification. \nThis extended hour lab-based program features exclusive options\, such as our  designed Evening Exam Review Sessions\, and our Exam Pass Guarantee. \nTesting Onsite-  Vouchers and Lunch Included! Hotel can be added for $110 a night \n\n\n \n URL:https://www.lammle.com/event/ccnp-security-12-day-bootcamp-8-19/ LOCATION:PA\, Philadelphia\, United States CATEGORIES:Cisco Security Training,CCNP Security,CCNA/CCNP/CCIE,CCNP R/S,CCNA Security (IINS) END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190819 DTEND;VALUE=DATE:20190826 DTSTAMP:20190616T232010 CREATED:20190213T220502Z LAST-MODIFIED:20190213T220703Z UID:48094-1566172800-1566777599@www.lammle.com SUMMARY:CompTIA A+/Network+ Certification 7-day Bootcamp starts 8/19 in D.C.! DESCRIPTION:Our 7-Day A+/Network+ Certification Boot Camp covers baseline skills needed by IT professionals to perform critical IT support & networking tasks. \nCOMPTIA THREE EXAMS COVERED: CompTIA A+ Core (220-1001) – covers mobile devices\, networking technology\, hardware\, virtualization and cloud computing and network troubleshooting. CompTIA A+ Core (220-1002) – covers installing and configuring operating systems\, expanded security\, software troubleshooting and operational procedures. \nThe third exams is CompTIA Network+ (N10-007) – covers networking\, critical security\, cloud computing\, and virtualization technologies. \nWhat’s Included: \n\n\n\n1\nCompTIA – A+/Network+ Boot Camp\n$4295.00\n\n\n1\nCustomized Official CompTIA A+/Network+ Courseware\nIncluded\n\n\n1\nCompTIA Exam Review/Lab Guide\nIncluded\n\n\n1\nSelf-Paced e-Learning Package for CompTIA A+/Network+\nIncluded\n\n\n1\nRealistic Exam Preparation Software with over 600+ updated practice questions\nIncluded\n\n\n1\nOfficial CompTIA A+ and Network+ Examination Vouchers\nIncluded\n\n\n1\nOnsite Delivery of CompTIA A+/Network+ Examinations\, via Pearson VUE\nIncluded\n\n\n1\nA+/Network+ Certification Guarantee\nIncluded\n\n\n1\n$1000 Promotional Discount\n$-1000.00\n\n\n\n\n\nTotal\n$3295.00\n\n\n\n\n\n \n URL:https://www.lammle.com/event/comptia-a-network-certification-7-day-bootcamp-starts-8-19/ LOCATION:Washington D.C.\, DC\, United States CATEGORIES:CompTIA END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190819 DTEND;VALUE=DATE:20190824 DTSTAMP:20190616T232010 CREATED:20190402T174950Z LAST-MODIFIED:20190402T175407Z UID:48621-1566172800-1566604799@www.lammle.com SUMMARY:Viptela Cisco SD-WAN 5-day Intense Training 8/19 DESCRIPTION:SD-WAN: Advanced Operations & Troubleshooting Bootcamp (SDWOTS) v1.0 is a five-day course. We will cover Cisco Software-Defined WAN (SD-WAN) which is an overlay architecture that overcomes the biggest drawbacks of traditional WAN. Students will be able to operate a Cisco SD-WAN over any transport (MPLS\, Broadband\, LTE\, VSAT etc.) and provide troubleshooting\, management\, policy control and application visibility across the enterprise. \nThis hands-on Course covers the Cisco SD-WAN product and contains extensive labs to reinforce the knowledge learned. \nCourse Objectives \nUpon completing this course\, the learner will be able to meet these overall objectives: \n\nDescribe how to deploy SD-WAN\nConfigure SD-WAN environment\nDeploy Zero-Touch Provisioning\nImplement SD-WAN Security\nConfigure SD-WAN Policies\nOperate SD-WAN Devices and software\nTroubleshoot SD-WAN environment\n\n  \nCourse Outline \nModule 1: Cisco SD-WAN Introduction \n\nHigh-level Cisco SD-WAN Deployment models\nApplication level SD-WAN solution\nCisco SDWAN high availability solution\nCisco SD-WAN Scalability\nCisco SD-WAN Solution Benefits\n\nModule 2: Cisco SD-WAN Orchestration \n\nIntroduction\nvManage NMS\nvSmart Controller\nvBond Orchestrator\nController Resiliency Architecture\n\nModule 3: Site Architecture and Deployment Models \n\nSite Capabilities\nvEdge Router\nvEdge form factors\n\nModule 4: Zero Touch Provisioning \n\nOverview\nUser Input Required for the ZTP Automatic Authentication Process\nAuthentication between the vBond Orchestrator and a vEdge Router\nAuthentication between the vEdge Router and the vManage NMS\nAuthentication between the vSmart Controller and the vEdge Router\n\nModule 5: Cisco SD-WAN Solution \n\nOverlay Management Protocol (OMP)\nCisco SDWAN Circuit Aggregation Capabilities\nSecure Connectivity in Cisco SD-WAN\nPerformance Tracking Mechanisms\nApplication Discovery\nDynamic Path Selection\nPerformance Based Routing\nDynamic Cloud Access\n\nModule 6: Operations Best Practices \n\nConfig: Test Configuration Changes Before Committing\nNAT: Secure Routers Acting as NATs\nvEdge Routers: Connect to the Console Port\nvEdge Routers: Use the Poweroff Command\nViptela Devices: Site ID Naming Conventions\nViptela Devices: Using the System IP Address\nvManage NMS: Disaster Recovery\n\nModule 7: Application Monitoring \n\nvManage\nvAnalytics\nEcosystem Partner Solutions\n\nModule 8: Troubleshooting Methods \n\nRemote Access\nConsole Access\nLAN Interfaces\nWAN Interfaces\nControl Connections\n\nModule 9: General Troubleshooting \n\nCheck Application-Aware Routing Traffic\nCollect Device Data To Send to Customer Support\nMonitor Alarms and Events\nMonitor TCP Optimization\nPing a Viptela Device\nRun a Traceroute\nSimulate Flows\nTroubleshoot Cellular Interfaces\nTroubleshoot Device Bringup\nTroubleshoot WiFi Connnections\nUse Syslog Messages\nTunnel Health\n\nModule 10: Troubleshooting: Data Plane Issues      \n\nBFD Session Information\nCflowd Information\nData Policies\nDPI Information\nSymptom: Site Cannot Reach Applications in Datacenter\nSymptom: vManage Showing vEdge or Interface Down\nSymptom: Site-Wide Loss of Connectivity (Blackout)\nSymptom: Poor Application Performance (Brownout)\nIssue Severity Assessment\n\nModule 11: Troubleshooting:  Routing Issues \n\nBGP Information\nMulticast Information\nOMP Information\nOSPF Information\nPIM Information\nSymptom: Some or All Routes Missing from vEdge Routing table\nSymptom: Data Traffic Using Suboptimal Path\nSymptom: Data Traffic Not Using All Transports\n\nModule 12: Application-Aware Routing \n\nApplication Performance with CloudExpress Service\nTunnel Latency Statistics\nTunnel Loss Statistics\n\nModule 13: Interface Troubleshooting \n\nReset an Interface\nAll Interfaces\nARP Table Entries\nCellular Interface Information\nDHCP Server and Interface Information\nInterface MTU Information\nManagement Interfaces\nVRRP Information\nWAN Interfaces\n\nModule 14: Network Operations \n\nCheck Alarms and Events\nCheck User Accounts and Permissions\nDeploy the Viptela Overlay Network\nDetermine the Status of Network Sites\nControl Connections\nData Connections\nNetwork Performance with vAnalytics Platform\nOMP Status\n\nModule 15: Security Certificate Troubleshooting \n\nGenerate a Certificate\nUpload the vEdge Serial Number File\nCertificate\nCSR\n\nModule 16: Viptela Devices Maintenance \n\nDecommission a vEdge Cloud Router\nDetermine the Status of a Network Device\nLocate a Viptela Device\nMigrate a Controller’s Virtual Machine Using vMotion\nReboot a Device\nRemove a vEdge Router’s Serial Number from the vManage NMS\nReplace a vEdge Router\nRestore the vManage NMS\nSet Up User Accounts to Access Viptela Devices\nValidate or Invalidate a vEdge Router\nSoftware Versions Installed on a Device\nStatus of a vBond Orchestrator\nStatus of a vEdge Router\nStatus of a vSmart Controller\n\nModule 17: Viptela Device Operation and Troubleshooting \n\nDetermine Changes to a Configuration Template\nDetermine Why a Device Rejects a Template\nAlarm Severity Levels\nHardware Alarms\nChecking Alarms and Notifications\nLEDs\nAdditional Information\nRestore a vEdge Router\nRemove vEdge Router Components\n\nModule 18: Working With Viptela Support      \n\nCase Priority Levels and Response Times\nInformation for Opening Cases\nViptela Customer Support Portal\nOther Ways to Contact Support\n\nLab Outline \n\nIntroduction to the Cisco SD-WAN\nAdd vEdge to vManage Inventory\nControl-Plane Connectivity\nOverlay Network\nZero-Touch Provisioning\nvManage Templates\nvManage Basic Policies\nApplication Aware Policies\nAdvanced Policies\nAnalytics\nMultiTenant Mode and Tenants\nTroubleshooting Methods\nTroubleshooting Data Plane Issues\nTroubleshooting Routing Issues\nBest Practices\n\n\n\n \n URL:https://www.lammle.com/event/viptela-training-cisco-sd-wan-8-19/ LOCATION:Live Online CATEGORIES:Cisco Viptela SD-WAN END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190819 DTEND;VALUE=DATE:20190824 DTSTAMP:20190616T232010 CREATED:20190423T153124Z LAST-MODIFIED:20190423T153329Z UID:49243-1566172800-1566604799@www.lammle.com SUMMARY:Implementing and Configuring Cisco Identity Services Engine (SISE) 8/19/19 DESCRIPTION:Cisco Security Training\nImplementing and Configuring Cisco Identity Services Engine (SISE) v2.4 is a 5-day Cisco ISE training program that discusses the Cisco Identity Services Engine\, an identity and access control policy platform that provides a single policy plane across the entire organization\, combining multiple services\, including authentication\, authorization\, and accounting (AAA)\, posture\, profiling\, device on-boarding\, and guest management\, into a single context-aware identity-based platform. \n*Add Cisco FTD/Firepower to this training!* \nCourse Outline\nModule 1: Introducing Cisco ISE Architecture and Deployment \nLesson 1: Using Cisco ISE as a Network Access Policy Engine\nLesson 2: Introducing Cisco ISE Deployment Models\nModule 2: Cisco ISE Policy Enforcement \nLesson 1: Introducing 802.1x and MAB Access: Wired and Wireless\nLesson 2: Introducing Identity Management\nLesson 3: Configuring Certificate Services\nLesson 4: Introducing Cisco ISE Policy\nLesson 5: Configuring Cisco ISE Policy Sets\nLesson 6: Implementing Third-Party Network Access Device Support\nLesson 7: Introducing Cisco TrustSec\nLesson 8: Introducing EasyConnect\nModule 3: Web Authentication and Guest Services \nLesson 1: Introducing Web Access with Cisco ISE\nLesson 2: Introducing ISE Guest Access Components\nLesson 3: Configuring Guest Access Settings\nLesson 4: Configuring Portals: Sponsors and Guests\nModule 4: Cisco ISE Profiler \nLesson 1: Introducing Cisco ISE Profiler\nLesson 2: Configuring Cisco ISE Profiling\nModule 5: Cisco ISE BYOD \nLesson 1: Introducing the Cisco ISE BYOD Process\nLesson 2: Describing BYOD Flow\nLesson 3: Configuring My Devices Portal Settings\nLesson 4: Configuring Certificates in BYOD Scenarios\nModule 6: Cisco ISE Endpoint Compliance Services \nLesson 1: Introducing Endpoint Compliance\nLesson 2: Configuring Client Posture Services and Provisioning in Cisco ISE\nModule 7: Cisco ISE with AMP and VPN-Based Services \nLesson 1: Introducing VPN Access Using Cisco ISE\nLesson 2: Configuring Cisco AMP for ISE\nModule 8: Cisco ISE Integrated Solutions with APIs \nLesson 1: Introducing Location-Based Authorization\nLesson 2: Introducing Cisco ISE 2.x pxGrid\nModule 9: Working with Network Access Devices \nLesson 1: Configuring TACACS+ for Cisco ISE Device Administration\nModule 10: Cisco ISE Design \nLesson 1: Designing and Deployment Best Practices\nLesson 2: Performing Cisco ISE Installation and Configuration Best Practices\nLesson 3: Deploying Failover and High-Availabilty\nModule 11: Configuring Third Party NAD Support \nLesson 1: Configuring Third-Party NAD Support \nLab Outline \nLab 1: Configure Initial Cisco ISE setup\, GUI familiarization\, system certificate usage \nLab 2: Integrate Cisco ISE with Active Directory \nLab 3: Configure Basic Policy on Cisco ISE \nLab 4: Configure Conversion to Policy Sets \nLab 5: Configure Access Policy for Easy Connect \nLab 6: Configure Guest Access \nLab 7: Configure Guest Access Operations \nLab 8: Create Guest Reports \nLab 9: Configure Profiling \nLab 10: Customize the Cisco ISE Profiling Configuration \nLab 11: Create Cisco ISE Profiling Reports \nLab 12: Configure BYOD \nLab 13: Blacklisting a Device \nLab 14: Configure Compliance Services on Cisco ISE \nLab 15: Configure Client Provisioning \nLab 16: Configure Posture Policies \nLab 17: Test and Monitor Compliance Based Access \nLab 18: Test Compliance Policy \nLab 19: Configure Cisco ISE for VPN Access \nLab 20: Configure Threat-Centric NAC using Cisco AMP (Optional) \nLab 21: Configure Cisco ISE pxGrid and Cisco WSA Integration \nLab 22: Configure Cisco ISE for Basic Device Administration \nLab 23: Configure TACACS+ Command Authorization \n\n\n \n URL:https://www.lammle.com/event/8-19/ LOCATION:Online CATEGORIES:Cisco Security Training,ISE,CCIE Security,CCNP Security,CCNA Security (IINS) END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190820 DTEND;VALUE=DATE:20190824 DTSTAMP:20190616T232010 CREATED:20190510T182119Z LAST-MODIFIED:20190602T212215Z UID:49502-1566259200-1566604799@www.lammle.com SUMMARY:Cisco Firepower/FTD New 6.4 Code Intense Hands-on Class 8/20 week Live Online DESCRIPTION:4-day class\, class runs 9-4pm CST Tues-Fri \nSat rack time available to students for extra lab time! \n \nOver 70-hands-on labs to help you really understand the material and how Firepower works! \nYou will learn how to administrate a Cisco Firepower and FTD environment! 5-days of rack time included! \nFirepower Class TOC May 2019 \nSingle student: $3795 \nTwo students: $3495 each \nThree students: $2995 each \nFour students: $2495 each \nFive or more\, contact for private onsite! \n\n\n \n URL:https://www.lammle.com/event/8-20-online/ LOCATION:Live Online CATEGORIES:Cisco Security Training,Firepower END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190826 DTEND;VALUE=DATE:20190831 DTSTAMP:20190616T232010 CREATED:20190611T184118Z LAST-MODIFIED:20190611T185553Z UID:50151-1566777600-1567209599@www.lammle.com SUMMARY:Cisco CCNA R/S 5-day Bootcamp with Testing Onsite Starts 8/26/19 in Colorado! DESCRIPTION:Cisco CCNA Routing and Switching 5-day Bootcamp in Colorado Spring\, Colorado!\nThis class is available Live Online as well! \nIncludes: \n\n\n\nQTY\nDESCRIPTION\nPRICE\n\n\n\n\n1\nCisco – CCNA Routing and Switching\n$4895.00\n\n\n1\nBoson Practice Labs (1 Year Access)\nIncluded\n\n\n1\nCCNA\nIncluded\n\n\n1\nExam Preparation Study Guide\nIncluded\n\n\n1\n2 Cisco Exam Vouchers – Pearson VUE Onsite Testing\nIncluded\n\n\n1\nTodd Lammle Education Guarantee\nIncluded\n\n\n1\nThis months discount\n$-1400.00\n\n\n\n\n\nTotal\n$3495.00\n\n\n\nIncludes ALL practice questions and hands-on labs needed to pass your exams the first time! \nAlso Includes full Todd Lammle CCNA pre-study program with videos\, books\, labs and practice questions! \n\n\n \n URL:https://www.lammle.com/event/cisco-ccna-r-s-cisco-day-bootcamp-8-5-copy-2/ LOCATION:Colorado Springs\, 1 Lake Avenue\, Colorado Springs\, CO\, 8090\, United States CATEGORIES:Cisco Security Training,CCNA,CCNA R/S,Cisco ICND2,CCNA/CCNP/CCIE,CCNA Security (IINS),Cisco CCNA Boot Camp Training END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190909 DTEND;VALUE=DATE:20190921 DTSTAMP:20190616T232010 CREATED:20190423T141415Z LAST-MODIFIED:20190423T141702Z UID:49185-1567987200-1569023999@www.lammle.com SUMMARY:Cisco CCNP R/S 12-day Certification Bootcamp starts 9/9/19 DESCRIPTION:\n12 Day Accelerated Program for Cisco’s CCNP Routing and Switching Certification is an intensive course delivered in our proprietary Lecture\, Lab\, Review (exam-focused) format. Given our nearly 22 years experience in preparing students to achieve the CCNP certification\, our instructors\, courseware\, and lab sessions are all uniquely tailored to give students the highest probability of success. \nThis extended-hour lab-based program covers the CCNP certification requirements in an environment designed enhance your learning experience. During the program\, students will acquire the knowledge and skills related to plan\, implement\, verify and troubleshoot local and wide-area enterprise networks and work collaboratively with specialists on advanced security\, voice\, wireless and video solutions. \nThe routing and switching protocol knowledge from this certification will provide a lasting foundation as these skills are equally relevant in the physical networks of today and the virtualized network functions of tomorrow. \n\n\nCCNP CERTIFICATION COURSE\nUpon successfully passing the required exams\, students leave this program with Cisco’s CCNP Routing and Switching certification. \nWHAT’S INCLUDED\n\nCCNP Routing & Switching Courseware (electronic format)\nCCNP Routing & Switching Practice Labs (1 Year Access)\nCCNP Routing & Switching Exam Preparation Study Guide\nCisco CCNP Routing & Switching Evening Exam Review Sessions\nCisco 300-101 ROUTE Exam Voucher\nCisco 300-115 SWITCH Exam Voucher\nCisco 300-135 TSHOOT Exam Voucher\nCCNP Routing & Switching Exam Support\nCCNP Routing & Switching Exam Pass Guarantee\nCPE/CEU Post Class Package\n\n\n  \n\n\n\nQTY\nDESCRIPTION\nPRICE\n\n\n\n\n1\nCisco – CCNP Routing And Switching Boot Camp\n$8995.00\n\n\n1\nCisco Exam Preparation Study Guide\nIncluded\n\n\n1\nEvening Review W/ Cisco CCNP Practice Exams\nIncluded\n\n\n1\n3 Cisco Exam Vouchers – Pearson VUE Onsite Testing\nIncluded\n\n\n\n\n\n\n\n1\nSelect Course Events Only\n$-2500.00\n\n\n\n\n\nTotal\n$6495.00\n\n\n\n\n\n \n URL:https://www.lammle.com/event/csico-ccnp-r-s-12-day-9-9/ LOCATION:PA\, Philadelphia\, United States CATEGORIES:CCNP R/S,CCNA/CCNP/CCIE END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190909 DTEND;VALUE=DATE:20190914 DTSTAMP:20190616T232010 CREATED:20190511T134429Z LAST-MODIFIED:20190602T212039Z UID:49542-1567987200-1568419199@www.lammle.com SUMMARY:*London in-person with Todd Lammle!* Cisco Firepower/FTD New 6.4 Code Intense Hands-on Class 9/9 week DESCRIPTION:5-day class\, class runs 9-4pm in London! Ends noon on Friday.\nSaturday rack time available to students for extra lab time! \n \nOver 70-hands-on labs to help you really understand the material and how Firepower works! \nYou will learn how to administrate a Cisco Firepower and FTD environment! 6-days of rack time included! \nFirepower Class TOC May 2019 \nSingle student: $3995 \nTwo students: $3695 each \nThree students: $3295 each \nFour students: $2795 each \nFive or more\, contact for private onsite! \n\n\n \n URL:https://www.lammle.com/event/9-10/ LOCATION:London\, London\, United Kingdom CATEGORIES:Cisco Security Training,Firepower END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190909 DTEND;VALUE=DATE:20190914 DTSTAMP:20190616T232010 CREATED:20190611T184105Z LAST-MODIFIED:20190611T190151Z UID:50150-1567987200-1568419199@www.lammle.com SUMMARY:Cisco CCNA R/S 5-day Bootcamp with Testing Onsite Starts 9/9/19 in D.C. DESCRIPTION:Cisco CCNA Routing and Switching 5-day Bootcamp in D.C.\nThis class is available Live Online as well! \nIncludes: \n\n\n\nQTY\nDESCRIPTION\nPRICE\n\n\n\n\n1\nCisco – CCNA Routing and Switching\n$4895.00\n\n\n1\nBoson Practice Labs (1 Year Access)\nIncluded\n\n\n1\nCCNA\nIncluded\n\n\n1\nExam Preparation Study Guide\nIncluded\n\n\n1\n2 Cisco Exam Vouchers – Pearson VUE Onsite Testing\nIncluded\n\n\n1\nTodd Lammle Education Guarantee\nIncluded\n\n\n1\nThis months discount\n$-1400.00\n\n\n\n\n\nTotal\n$3495.00\n\n\n\nIncludes ALL practice questions and hands-on labs needed to pass your exams the first time! \nAlso Includes full Todd Lammle CCNA pre-study program with videos\, books\, labs and practice questions! \n\n\n \n URL:https://www.lammle.com/event/cisco-ccna-r-s-cisco-day-bootcamp-9-9/ LOCATION:Washington D.C.\, DC\, United States CATEGORIES:Cisco Security Training,CCNA,CCNA R/S,Cisco ICND2,CCNA/CCNP/CCIE,CCNA Security (IINS),Cisco CCNA Boot Camp Training END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190916 DTEND;VALUE=DATE:20190921 DTSTAMP:20190616T232010 CREATED:20190402T175603Z LAST-MODIFIED:20190402T175954Z UID:48626-1568592000-1569023999@www.lammle.com SUMMARY:Viptela Cisco SD-WAN 5-day Intense Training 9/16 DESCRIPTION:SD-WAN: Advanced Operations & Troubleshooting Bootcamp (SDWOTS) v1.0 is a five-day course. We will cover Cisco Software-Defined WAN (SD-WAN) which is an overlay architecture that overcomes the biggest drawbacks of traditional WAN. Students will be able to operate a Cisco SD-WAN over any transport (MPLS\, Broadband\, LTE\, VSAT etc.) and provide troubleshooting\, management\, policy control and application visibility across the enterprise. \nThis hands-on Course covers the Cisco SD-WAN product and contains extensive labs to reinforce the knowledge learned. \nCourse Objectives \nUpon completing this course\, the learner will be able to meet these overall objectives: \n\nDescribe how to deploy SD-WAN\nConfigure SD-WAN environment\nDeploy Zero-Touch Provisioning\nImplement SD-WAN Security\nConfigure SD-WAN Policies\nOperate SD-WAN Devices and software\nTroubleshoot SD-WAN environment\n\n  \nCourse Outline \nModule 1: Cisco SD-WAN Introduction \n\nHigh-level Cisco SD-WAN Deployment models\nApplication level SD-WAN solution\nCisco SDWAN high availability solution\nCisco SD-WAN Scalability\nCisco SD-WAN Solution Benefits\n\nModule 2: Cisco SD-WAN Orchestration \n\nIntroduction\nvManage NMS\nvSmart Controller\nvBond Orchestrator\nController Resiliency Architecture\n\nModule 3: Site Architecture and Deployment Models \n\nSite Capabilities\nvEdge Router\nvEdge form factors\n\nModule 4: Zero Touch Provisioning \n\nOverview\nUser Input Required for the ZTP Automatic Authentication Process\nAuthentication between the vBond Orchestrator and a vEdge Router\nAuthentication between the vEdge Router and the vManage NMS\nAuthentication between the vSmart Controller and the vEdge Router\n\nModule 5: Cisco SD-WAN Solution \n\nOverlay Management Protocol (OMP)\nCisco SDWAN Circuit Aggregation Capabilities\nSecure Connectivity in Cisco SD-WAN\nPerformance Tracking Mechanisms\nApplication Discovery\nDynamic Path Selection\nPerformance Based Routing\nDynamic Cloud Access\n\nModule 6: Operations Best Practices \n\nConfig: Test Configuration Changes Before Committing\nNAT: Secure Routers Acting as NATs\nvEdge Routers: Connect to the Console Port\nvEdge Routers: Use the Poweroff Command\nViptela Devices: Site ID Naming Conventions\nViptela Devices: Using the System IP Address\nvManage NMS: Disaster Recovery\n\nModule 7: Application Monitoring \n\nvManage\nvAnalytics\nEcosystem Partner Solutions\n\nModule 8: Troubleshooting Methods \n\nRemote Access\nConsole Access\nLAN Interfaces\nWAN Interfaces\nControl Connections\n\nModule 9: General Troubleshooting \n\nCheck Application-Aware Routing Traffic\nCollect Device Data To Send to Customer Support\nMonitor Alarms and Events\nMonitor TCP Optimization\nPing a Viptela Device\nRun a Traceroute\nSimulate Flows\nTroubleshoot Cellular Interfaces\nTroubleshoot Device Bringup\nTroubleshoot WiFi Connnections\nUse Syslog Messages\nTunnel Health\n\nModule 10: Troubleshooting: Data Plane Issues      \n\nBFD Session Information\nCflowd Information\nData Policies\nDPI Information\nSymptom: Site Cannot Reach Applications in Datacenter\nSymptom: vManage Showing vEdge or Interface Down\nSymptom: Site-Wide Loss of Connectivity (Blackout)\nSymptom: Poor Application Performance (Brownout)\nIssue Severity Assessment\n\nModule 11: Troubleshooting:  Routing Issues \n\nBGP Information\nMulticast Information\nOMP Information\nOSPF Information\nPIM Information\nSymptom: Some or All Routes Missing from vEdge Routing table\nSymptom: Data Traffic Using Suboptimal Path\nSymptom: Data Traffic Not Using All Transports\n\nModule 12: Application-Aware Routing \n\nApplication Performance with CloudExpress Service\nTunnel Latency Statistics\nTunnel Loss Statistics\n\nModule 13: Interface Troubleshooting \n\nReset an Interface\nAll Interfaces\nARP Table Entries\nCellular Interface Information\nDHCP Server and Interface Information\nInterface MTU Information\nManagement Interfaces\nVRRP Information\nWAN Interfaces\n\nModule 14: Network Operations \n\nCheck Alarms and Events\nCheck User Accounts and Permissions\nDeploy the Viptela Overlay Network\nDetermine the Status of Network Sites\nControl Connections\nData Connections\nNetwork Performance with vAnalytics Platform\nOMP Status\n\nModule 15: Security Certificate Troubleshooting \n\nGenerate a Certificate\nUpload the vEdge Serial Number File\nCertificate\nCSR\n\nModule 16: Viptela Devices Maintenance \n\nDecommission a vEdge Cloud Router\nDetermine the Status of a Network Device\nLocate a Viptela Device\nMigrate a Controller’s Virtual Machine Using vMotion\nReboot a Device\nRemove a vEdge Router’s Serial Number from the vManage NMS\nReplace a vEdge Router\nRestore the vManage NMS\nSet Up User Accounts to Access Viptela Devices\nValidate or Invalidate a vEdge Router\nSoftware Versions Installed on a Device\nStatus of a vBond Orchestrator\nStatus of a vEdge Router\nStatus of a vSmart Controller\n\nModule 17: Viptela Device Operation and Troubleshooting \n\nDetermine Changes to a Configuration Template\nDetermine Why a Device Rejects a Template\nAlarm Severity Levels\nHardware Alarms\nChecking Alarms and Notifications\nLEDs\nAdditional Information\nRestore a vEdge Router\nRemove vEdge Router Components\n\nModule 18: Working With Viptela Support      \n\nCase Priority Levels and Response Times\nInformation for Opening Cases\nViptela Customer Support Portal\nOther Ways to Contact Support\n\nLab Outline \n\nIntroduction to the Cisco SD-WAN\nAdd vEdge to vManage Inventory\nControl-Plane Connectivity\nOverlay Network\nZero-Touch Provisioning\nvManage Templates\nvManage Basic Policies\nApplication Aware Policies\nAdvanced Policies\nAnalytics\nMultiTenant Mode and Tenants\nTroubleshooting Methods\nTroubleshooting Data Plane Issues\nTroubleshooting Routing Issues\nBest Practices\n\n\n\n \n URL:https://www.lammle.com/event/viptela-training-cisco-sd-wan-9-16/ LOCATION:Live Online CATEGORIES:Cisco Viptela SD-WAN END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190916 DTEND;VALUE=DATE:20190921 DTSTAMP:20190616T232010 CREATED:20190511T133253Z LAST-MODIFIED:20190511T133521Z UID:49523-1568592000-1569023999@www.lammle.com SUMMARY:Implementing and Configuring Cisco Identity Services Engine (SISE) 9/16/19 DESCRIPTION:Cisco Security Training\nImplementing and Configuring Cisco Identity Services Engine (SISE) v2.4 is a 5-day Cisco ISE training program that discusses the Cisco Identity Services Engine\, an identity and access control policy platform that provides a single policy plane across the entire organization\, combining multiple services\, including authentication\, authorization\, and accounting (AAA)\, posture\, profiling\, device on-boarding\, and guest management\, into a single context-aware identity-based platform. \n*Add Cisco FTD/Firepower to this training!* \nCourse Outline\nModule 1: Introducing Cisco ISE Architecture and Deployment \nLesson 1: Using Cisco ISE as a Network Access Policy Engine\nLesson 2: Introducing Cisco ISE Deployment Models\nModule 2: Cisco ISE Policy Enforcement \nLesson 1: Introducing 802.1x and MAB Access: Wired and Wireless\nLesson 2: Introducing Identity Management\nLesson 3: Configuring Certificate Services\nLesson 4: Introducing Cisco ISE Policy\nLesson 5: Configuring Cisco ISE Policy Sets\nLesson 6: Implementing Third-Party Network Access Device Support\nLesson 7: Introducing Cisco TrustSec\nLesson 8: Introducing EasyConnect\nModule 3: Web Authentication and Guest Services \nLesson 1: Introducing Web Access with Cisco ISE\nLesson 2: Introducing ISE Guest Access Components\nLesson 3: Configuring Guest Access Settings\nLesson 4: Configuring Portals: Sponsors and Guests\nModule 4: Cisco ISE Profiler \nLesson 1: Introducing Cisco ISE Profiler\nLesson 2: Configuring Cisco ISE Profiling\nModule 5: Cisco ISE BYOD \nLesson 1: Introducing the Cisco ISE BYOD Process\nLesson 2: Describing BYOD Flow\nLesson 3: Configuring My Devices Portal Settings\nLesson 4: Configuring Certificates in BYOD Scenarios\nModule 6: Cisco ISE Endpoint Compliance Services \nLesson 1: Introducing Endpoint Compliance\nLesson 2: Configuring Client Posture Services and Provisioning in Cisco ISE\nModule 7: Cisco ISE with AMP and VPN-Based Services \nLesson 1: Introducing VPN Access Using Cisco ISE\nLesson 2: Configuring Cisco AMP for ISE\nModule 8: Cisco ISE Integrated Solutions with APIs \nLesson 1: Introducing Location-Based Authorization\nLesson 2: Introducing Cisco ISE 2.x pxGrid\nModule 9: Working with Network Access Devices \nLesson 1: Configuring TACACS+ for Cisco ISE Device Administration\nModule 10: Cisco ISE Design \nLesson 1: Designing and Deployment Best Practices\nLesson 2: Performing Cisco ISE Installation and Configuration Best Practices\nLesson 3: Deploying Failover and High-Availabilty\nModule 11: Configuring Third Party NAD Support \nLesson 1: Configuring Third-Party NAD Support \nLab Outline \nLab 1: Configure Initial Cisco ISE setup\, GUI familiarization\, system certificate usage \nLab 2: Integrate Cisco ISE with Active Directory \nLab 3: Configure Basic Policy on Cisco ISE \nLab 4: Configure Conversion to Policy Sets \nLab 5: Configure Access Policy for Easy Connect \nLab 6: Configure Guest Access \nLab 7: Configure Guest Access Operations \nLab 8: Create Guest Reports \nLab 9: Configure Profiling \nLab 10: Customize the Cisco ISE Profiling Configuration \nLab 11: Create Cisco ISE Profiling Reports \nLab 12: Configure BYOD \nLab 13: Blacklisting a Device \nLab 14: Configure Compliance Services on Cisco ISE \nLab 15: Configure Client Provisioning \nLab 16: Configure Posture Policies \nLab 17: Test and Monitor Compliance Based Access \nLab 18: Test Compliance Policy \nLab 19: Configure Cisco ISE for VPN Access \nLab 20: Configure Threat-Centric NAC using Cisco AMP (Optional) \nLab 21: Configure Cisco ISE pxGrid and Cisco WSA Integration \nLab 22: Configure Cisco ISE for Basic Device Administration \nLab 23: Configure TACACS+ Command Authorization \n\n\n \n URL:https://www.lammle.com/event/9-16/ LOCATION:Online CATEGORIES:Cisco Security Training,ISE,CCIE Security,CCNP Security,CCNA Security (IINS) END:VEVENT END:VCALENDAR